Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de Utilidade de Cleanroom
Água para sistema de injeção
A multiple-effect distillation system for generating hot Water for Injection with hygienic construction, energy recovery and continuous quality monitoring.
- Falling-film multiple-effect distillation
- Integrated energy recovery
- Automatic off-quality diversion
Introdução do produto
The skid uses sequential stainless-steel evaporation columns, feed preheaters, droplet separation and a final condenser to convert suitable feed water into high-purity hot distillate.
Características-chave
Hygienic 316L product path
Feed preheating and heat recovery
Conductivity monitoring
Automatic diversion
PLC/HMI controls
Preocupações do produto do cliente
WFI generation requires reliable vapor separation, drainable hygienic construction and protection against off-quality startup distillate.
Droplet carryover into product vaporUse staged gravitational or mechanical separation within each evaporation effect.
High utility consumptionRecover latent and sensible heat through sequential effects and feed preheaters.
Startup distillate is out of rangeMonitor conductivity continuously and divert product automatically until the accepted window is reached.
Difficult sanitization and drainageApply hygienic sloped piping, drainable columns and controlled hot operating or sanitization sequences.
Aplicações típicas
Parenteral pharmaceutical manufacturingBiotechnology processingVaccine productionSterile formulationWFI storage and loop supply
Parâmetros técnicos
The number of effects, production flow, steam demand and condenser duty are configured around WFI demand and available utilities.
| Material principal | 316L stainless-steel evaporation columns, separators and product-contact tubing |
|---|---|
| Painel de espessura | Column and pressure-boundary wall thickness selected in mm by vessel design conditions |
| Largura efetiva | Skid width typically 1200–3000 mm, effect count dependent |
| Comprimento máximo | Skid length typically up to 9000 mm, capacity and effect count dependent |
| Aço enfrentando espessura | Stainless control enclosure and non-pressure cladding typically 1.5–3.0 mm |
| Densidade Core | 316L stainless-steel material density approximately 8000 kg/m³ |
| Condutividade térmica | 316L stainless steel approximately 16.3 W/(m·K) at ambient temperature |
| Superfície acabado | Controlled hygienic product-contact finish with brushed or insulated exterior surfaces |
| Tipo conjunto | Orbital-welded hygienic tubing with sanitary clamp instrument and service connections |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Three to ten effectsSteam or electric first-effect heatingHot or cooled WFI outputTOC monitor interfaceFeed degassingIntegrated pure-steam functionRemote batch and trend records
Planning a Water for Injection System specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
