Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Systèmes utilitaires Cleanroom
Système d'eau pour injection
A multiple-effect distillation system for generating hot Water for Injection with hygienic construction, energy recovery and continuous quality monitoring.
- Falling-film multiple-effect distillation
- Integrated energy recovery
- Automatic off-quality diversion
Introduction de produit
The skid uses sequential stainless-steel evaporation columns, feed preheaters, droplet separation and a final condenser to convert suitable feed water into high-purity hot distillate.
Key Features
Hygienic 316L product path
Feed preheating and heat recovery
Conductivity monitoring
Automatic diversion
PLC/HMI controls
Préoccupations du client produit
WFI generation requires reliable vapor separation, drainable hygienic construction and protection against off-quality startup distillate.
Droplet carryover into product vaporUse staged gravitational or mechanical separation within each evaporation effect.
High utility consumptionRecover latent and sensible heat through sequential effects and feed preheaters.
Startup distillate is out of rangeMonitor conductivity continuously and divert product automatically until the accepted window is reached.
Difficult sanitization and drainageApply hygienic sloped piping, drainable columns and controlled hot operating or sanitization sequences.
Les applications typiques
Parenteral pharmaceutical manufacturingBiotechnology processingVaccine productionSterile formulationWFI storage and loop supply
Paramètres techniques
The number of effects, production flow, steam demand and condenser duty are configured around WFI demand and available utilities.
| Matériaux de base | 316L stainless-steel evaporation columns, separators and product-contact tubing |
|---|---|
| Panneau épaisseur | Column and pressure-boundary wall thickness selected in mm by vessel design conditions |
| Largeur effective | Skid width typically 1200–3000 mm, effect count dependent |
| Longueur maximale | Skid length typically up to 9000 mm, capacity and effect count dependent |
| Acier face épaisseur | Stainless control enclosure and non-pressure cladding typically 1.5–3.0 mm |
| Densité Core | 316L stainless-steel material density approximately 8000 kg/m³ |
| Conductivité thermique | 316L stainless steel approximately 16.3 W/(m·K) at ambient temperature |
| surface finie | Controlled hygienic product-contact finish with brushed or insulated exterior surfaces |
| Type joint | Orbital-welded hygienic tubing with sanitary clamp instrument and service connections |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Three to ten effectsSteam or electric first-effect heatingHot or cooled WFI outputTOC monitor interfaceFeed degassingIntegrated pure-steam functionRemote batch and trend records
Planning a Water for Injection System specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
