Water for Injection system multiple-effect distillation skid three-quarter view

クリーンルームユーティリティシステム

注入システムのための水

A multiple-effect distillation system for generating hot Water for Injection with hygienic construction, energy recovery and continuous quality monitoring.

Falling-film multiple-effect distillation
Integrated energy recovery
Automatic off-quality diversion

見積もりリクエスト製品案内

商品紹介

The skid uses sequential stainless-steel evaporation columns, feed preheaters, droplet separation and a final condenser to convert suitable feed water into high-purity hot distillate.

主要な特徴

Multiple-effect thermal design

Hygienic 316L product path

Feed preheating and heat recovery

Conductivity monitoring

Automatic diversion

PLC/HMI controls

お客様の製品に関する懸念事項

WFI generation requires reliable vapor separation, drainable hygienic construction and protection against off-quality startup distillate.

Droplet carryover into product vaporUse staged gravitational or mechanical separation within each evaporation effect.

High utility consumptionRecover latent and sensible heat through sequential effects and feed preheaters.

Startup distillate is out of rangeMonitor conductivity continuously and divert product automatically until the accepted window is reached.

Difficult sanitization and drainageApply hygienic sloped piping, drainable columns and controlled hot operating or sanitization sequences.

典型的な用途

Parenteral pharmaceutical manufacturingBiotechnology processingVaccine productionSterile formulationWFI storage and loop supply

技術的なパラメータ

The number of effects, production flow, steam demand and condenser duty are configured around WFI demand and available utilities.

コア材料	316L stainless-steel evaporation columns, separators and product-contact tubing
パネルの厚さ	Column and pressure-boundary wall thickness selected in mm by vessel design conditions
有効幅	Skid width typically 1200–3000 mm, effect count dependent
最大長さ	Skid length typically up to 9000 mm, capacity and effect count dependent
鋼鉄の厚さを直面する	Stainless control enclosure and non-pressure cladding typically 1.5–3.0 mm
コア密度	316L stainless-steel material density approximately 8000 kg/m³
熱伝導率	316L stainless steel approximately 16.3 W/(m·K) at ambient temperature
表面仕上げ	Controlled hygienic product-contact finish with brushed or insulated exterior surfaces
ジョイントタイプ	Orbital-welded hygienic tubing with sanitary clamp instrument and service connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Three to ten effectsSteam or electric first-effect heatingHot or cooled WFI outputTOC monitor interfaceFeed degassingIntegrated pure-steam functionRemote batch and trend records

Planning a Water for Injection System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する