English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة المرافق الغرف النظيفة
المياه لنظام الحقن
A multiple-effect distillation system for generating hot Water for Injection with hygienic construction, energy recovery and continuous quality monitoring.
- Falling-film multiple-effect distillation
- Integrated energy recovery
- Automatic off-quality diversion
مقدمة المنتج
The skid uses sequential stainless-steel evaporation columns, feed preheaters, droplet separation and a final condenser to convert suitable feed water into high-purity hot distillate.
الخصائص الرئيسية
Hygienic 316L product path
Feed preheating and heat recovery
Conductivity monitoring
Automatic diversion
PLC/HMI controls
مخاوف المنتج للعملاء
WFI generation requires reliable vapor separation, drainable hygienic construction and protection against off-quality startup distillate.
Droplet carryover into product vaporUse staged gravitational or mechanical separation within each evaporation effect.
High utility consumptionRecover latent and sensible heat through sequential effects and feed preheaters.
Startup distillate is out of rangeMonitor conductivity continuously and divert product automatically until the accepted window is reached.
Difficult sanitization and drainageApply hygienic sloped piping, drainable columns and controlled hot operating or sanitization sequences.
تطبيقات نموذجية
Parenteral pharmaceutical manufacturingBiotechnology processingVaccine productionSterile formulationWFI storage and loop supply
المعلمات الفنية
The number of effects, production flow, steam demand and condenser duty are configured around WFI demand and available utilities.
| المواد الأساسية | 316L stainless-steel evaporation columns, separators and product-contact tubing |
|---|---|
| سمك اللوحة | Column and pressure-boundary wall thickness selected in mm by vessel design conditions |
| العرض الفعال | Skid width typically 1200–3000 mm, effect count dependent |
| الحد الأقصى الطول | Skid length typically up to 9000 mm, capacity and effect count dependent |
| الصلب يواجه سمك | Stainless control enclosure and non-pressure cladding typically 1.5–3.0 mm |
| الكثافة الأساسية | 316L stainless-steel material density approximately 8000 kg/m³ |
| الموصلية الحرارية | 316L stainless steel approximately 16.3 W/(m·K) at ambient temperature |
| إنهاء السطح | Controlled hygienic product-contact finish with brushed or insulated exterior surfaces |
| نوع المشترك | Orbital-welded hygienic tubing with sanitary clamp instrument and service connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Three to ten effectsSteam or electric first-effect heatingHot or cooled WFI outputTOC monitor interfaceFeed degassingIntegrated pure-steam functionRemote batch and trend records
Planning a Water for Injection System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
