Water for Injection system multiple-effect distillation skid three-quarter view

Утилитарные системы для чистых помещений

Вода для инъекционной системы

A multiple-effect distillation system for generating hot Water for Injection with hygienic construction, energy recovery and continuous quality monitoring.

Falling-film multiple-effect distillation
Integrated energy recovery
Automatic off-quality diversion

Запрос котировки Просмотреть продукты

Введение продукции

The skid uses sequential stainless-steel evaporation columns, feed preheaters, droplet separation and a final condenser to convert suitable feed water into high-purity hot distillate.

Основные характеристики

Multiple-effect thermal design

Hygienic 316L product path

Feed preheating and heat recovery

Conductivity monitoring

Automatic diversion

PLC/HMI controls

Обеспокоенность клиентов продуктами

WFI generation requires reliable vapor separation, drainable hygienic construction and protection against off-quality startup distillate.

Droplet carryover into product vaporUse staged gravitational or mechanical separation within each evaporation effect.

High utility consumptionRecover latent and sensible heat through sequential effects and feed preheaters.

Startup distillate is out of rangeMonitor conductivity continuously and divert product automatically until the accepted window is reached.

Difficult sanitization and drainageApply hygienic sloped piping, drainable columns and controlled hot operating or sanitization sequences.

Типичные приложения

Parenteral pharmaceutical manufacturingBiotechnology processingVaccine productionSterile formulationWFI storage and loop supply

Технические параметры

The number of effects, production flow, steam demand and condenser duty are configured around WFI demand and available utilities.

Основной материал	316L stainless-steel evaporation columns, separators and product-contact tubing
Толщина панели	Column and pressure-boundary wall thickness selected in mm by vessel design conditions
эффективная ширина	Skid width typically 1200–3000 mm, effect count dependent
Максимальная длина	Skid length typically up to 9000 mm, capacity and effect count dependent
Толщина линий стали	Stainless control enclosure and non-pressure cladding typically 1.5–3.0 mm
Плотность ядра	316L stainless-steel material density approximately 8000 kg/m³
Теплопроводимость	316L stainless steel approximately 16.3 W/(m·K) at ambient temperature
Поверхностная отделка	Controlled hygienic product-contact finish with brushed or insulated exterior surfaces
Объединенный тип	Orbital-welded hygienic tubing with sanitary clamp instrument and service connections
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Three to ten effectsSteam or electric first-effect heatingHot or cooled WFI outputTOC monitor interfaceFeed degassingIntegrated pure-steam functionRemote batch and trend records

Planning a Water for Injection System specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой