Water for Injection system multiple-effect distillation skid three-quarter view

Temiz Oda Hizmet Sistemi

Enjeksiyon sistemi için su

A multiple-effect distillation system for generating hot Water for Injection with hygienic construction, energy recovery and continuous quality monitoring.

Falling-film multiple-effect distillation
Integrated energy recovery
Automatic off-quality diversion

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The skid uses sequential stainless-steel evaporation columns, feed preheaters, droplet separation and a final condenser to convert suitable feed water into high-purity hot distillate.

Ana Özellikler

Multiple-effect thermal design

Hygienic 316L product path

Feed preheating and heat recovery

Conductivity monitoring

Automatic diversion

PLC/HMI controls

Müşteri Ürün Sorunları

WFI generation requires reliable vapor separation, drainable hygienic construction and protection against off-quality startup distillate.

Droplet carryover into product vaporUse staged gravitational or mechanical separation within each evaporation effect.

High utility consumptionRecover latent and sensible heat through sequential effects and feed preheaters.

Startup distillate is out of rangeMonitor conductivity continuously and divert product automatically until the accepted window is reached.

Difficult sanitization and drainageApply hygienic sloped piping, drainable columns and controlled hot operating or sanitization sequences.

Tipik uygulamalar

Parenteral pharmaceutical manufacturingBiotechnology processingVaccine productionSterile formulationWFI storage and loop supply

Teknik parametreler

The number of effects, production flow, steam demand and condenser duty are configured around WFI demand and available utilities.

Temel malzemeler	316L stainless-steel evaporation columns, separators and product-contact tubing
Panel kalınlığı	Column and pressure-boundary wall thickness selected in mm by vessel design conditions
Effective Width (Etkili Genişlik)	Skid width typically 1200–3000 mm, effect count dependent
Maksimum uzunluk	Skid length typically up to 9000 mm, capacity and effect count dependent
Çelik yüz yüze kalınlığı	Stainless control enclosure and non-pressure cladding typically 1.5–3.0 mm
Core Density (Çekirdek Yoğunluğu)	316L stainless-steel material density approximately 8000 kg/m³
Termal İletkenlik	316L stainless steel approximately 16.3 W/(m·K) at ambient temperature
Yüzey bitirme	Controlled hygienic product-contact finish with brushed or insulated exterior surfaces
Ortak tip	Orbital-welded hygienic tubing with sanitary clamp instrument and service connections
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Three to ten effectsSteam or electric first-effect heatingHot or cooled WFI outputTOC monitor interfaceFeed degassingIntegrated pure-steam functionRemote batch and trend records

Planning a Water for Injection System specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun