Water for Injection system multiple-effect distillation skid three-quarter view

클린룸 유틸리티 시스템

주입용 물 (Water for Injection)

A multiple-effect distillation system for generating hot Water for Injection with hygienic construction, energy recovery and continuous quality monitoring.

Falling-film multiple-effect distillation
Integrated energy recovery
Automatic off-quality diversion

견적 요청 제품 찾아보기

상품 소개

The skid uses sequential stainless-steel evaporation columns, feed preheaters, droplet separation and a final condenser to convert suitable feed water into high-purity hot distillate.

주요 기능

Multiple-effect thermal design

Hygienic 316L product path

Feed preheating and heat recovery

Conductivity monitoring

Automatic diversion

PLC/HMI controls

고객 제품 관심사

WFI generation requires reliable vapor separation, drainable hygienic construction and protection against off-quality startup distillate.

Droplet carryover into product vaporUse staged gravitational or mechanical separation within each evaporation effect.

High utility consumptionRecover latent and sensible heat through sequential effects and feed preheaters.

Startup distillate is out of rangeMonitor conductivity continuously and divert product automatically until the accepted window is reached.

Difficult sanitization and drainageApply hygienic sloped piping, drainable columns and controlled hot operating or sanitization sequences.

일반적인 응용 프로그램

Parenteral pharmaceutical manufacturingBiotechnology processingVaccine productionSterile formulationWFI storage and loop supply

기술 매개변수

The number of effects, production flow, steam demand and condenser duty are configured around WFI demand and available utilities.

핵심 재료	316L stainless-steel evaporation columns, separators and product-contact tubing
패널 두께	Column and pressure-boundary wall thickness selected in mm by vessel design conditions
유효 폭	Skid width typically 1200–3000 mm, effect count dependent
최대 길이	Skid length typically up to 9000 mm, capacity and effect count dependent
강철 면면 두께	Stainless control enclosure and non-pressure cladding typically 1.5–3.0 mm
코어 밀도	316L stainless-steel material density approximately 8000 kg/m³
열전도도 (Thermal Conductivity)	316L stainless steel approximately 16.3 W/(m·K) at ambient temperature
표면 마무리	Controlled hygienic product-contact finish with brushed or insulated exterior surfaces
접합 유형	Orbital-welded hygienic tubing with sanitary clamp instrument and service connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Three to ten effectsSteam or electric first-effect heatingHot or cooled WFI outputTOC monitor interfaceFeed degassingIntegrated pure-steam functionRemote batch and trend records

Planning a Water for Injection System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.