Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamentos de drenagem, higiene e segurança da sala limpa
Aço Inoxidável Trench Drain
Load-bearing stainless trench drain for higher washdown volumes and wheeled cleanroom equipment routes.
- Reinforced Load-Bearing Edges
- Removable Hygienic Grating
- Sloped Radiused Channel
- Cleanable Outlet Sump
Introdução do produto
The stainless steel trench drain provides a deeper, wider collection channel for clean manufacturing routes exposed to higher wash volumes or wheeled traffic. Reinforced edge rails support removable bar, ladder or hygienic grating, while a formed longitudinal fall guides water to a cleanable sump or direct outlet. Continuously welded radiused interiors remain accessible after the grate is lifted.
Características-chave
Lift-out grating exposes the channel and sump for cleaning.
A built-in fall directs wash water and reduces stagnant zones.
Custom depth, width and outlet position suit the floor and hydraulic load.
Preocupações do produto do cliente
High-volume wash zones and wheeled routes require stronger channel edges and greater hydraulic capacity without sacrificing cleanability.
Trolley and equipment wheels can deform lightly supported drain edges.Reinforced stainless edge rails transfer loading into the surrounding floor structure.
Deep channels can hide sediment beneath fixed grating.Removable load-rated grates expose the full radiused channel and sump.
Large wash volumes may pond in a flat trench.A fabricated longitudinal fall and sized outlet guide flow toward the discharge point.
Standard channel depths may conflict with slab or utility constraints.Clear width, depth, section length and sump arrangement are configurable for the installation.
Aplicações típicas
Equipment wash areasSterile utility roomsClean manufacturing floorsHygienic logistics routes
Parâmetros técnicos
Typical construction ranges for a load-bearing stainless trench are listed below; grate, depth and outlet are selected for flow, wheel load and floor build-up.
| Material principal | AISI 304 or 316L stainless steel channel and edge rails |
|---|---|
| Painel de espessura | 2.0-3.0 mm channel wall |
| Largura efetiva | 150-500 mm clear trench width |
| Comprimento máximo | Up to 6000 mm per fabricated section |
| Aço enfrentando espessura | 2.0-3.0 mm exposed stainless surfaces |
| Densidade Core | 7900 - 8000 kg / m3 para aço inoxidável |
| Condutividade térmica | 14 - 16 W / (m · K) para aço inoxidável |
| Superfície acabado | Pickled and passivated or satin-finished stainless steel |
| Tipo conjunto | Continuously welded channel modules with flanged transport-section joints |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Grau 304 ou 316L150-500 mm clear widthBar, ladder or hygienic grateCustom depth, sump and load rating
Planning a Stainless Steel Trench Drain specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
