Complete stainless steel trench drain in diagonal three-quarter view

클린룸 배수, 위생 및 안전 장비

스테인레스 스틸 트렌치 배수

Load-bearing stainless trench drain for higher washdown volumes and wheeled cleanroom equipment routes.

Reinforced Load-Bearing Edges
분리 가능한 위생 그리트
Sloped Radiused Channel
Cleanable Outlet Sump

견적 요청 제품 찾아보기

상품 소개

The stainless steel trench drain provides a deeper, wider collection channel for clean manufacturing routes exposed to higher wash volumes or wheeled traffic. Reinforced edge rails support removable bar, ladder or hygienic grating, while a formed longitudinal fall guides water to a cleanable sump or direct outlet. Continuously welded radiused interiors remain accessible after the grate is lifted.

주요 기능

Reinforced edge rails distribute wheel loads around the channel opening.

Lift-out grating exposes the channel and sump for cleaning.

A built-in fall directs wash water and reduces stagnant zones.

Custom depth, width and outlet position suit the floor and hydraulic load.

고객 제품 관심사

High-volume wash zones and wheeled routes require stronger channel edges and greater hydraulic capacity without sacrificing cleanability.

Trolley and equipment wheels can deform lightly supported drain edges.Reinforced stainless edge rails transfer loading into the surrounding floor structure.

Deep channels can hide sediment beneath fixed grating.Removable load-rated grates expose the full radiused channel and sump.

Large wash volumes may pond in a flat trench.A fabricated longitudinal fall and sized outlet guide flow toward the discharge point.

Standard channel depths may conflict with slab or utility constraints.Clear width, depth, section length and sump arrangement are configurable for the installation.

일반적인 응용 프로그램

Equipment wash areasSterile utility roomsClean manufacturing floorsHygienic logistics routes

기술 매개변수

Typical construction ranges for a load-bearing stainless trench are listed below; grate, depth and outlet are selected for flow, wheel load and floor build-up.

핵심 재료	AISI 304 or 316L stainless steel channel and edge rails
패널 두께	2.0-3.0 mm channel wall
유효 폭	150-500 mm clear trench width
최대 길이	제조된 단면당 최대 6000 mm
강철 면면 두께	2.0-3.0 mm exposed stainless surfaces
코어 밀도	7900 - 8000 kg / m 3 스테인레스 스틸
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 스테인레스 스틸
표면 마무리	Pickled and passivated or satin - finished stainless steel
접합 유형	Continuously welded channel modules with flanged transport-section joints
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

304 또는 316 L 등급150-500 mm clear widthBar, ladder or hygienic grateCustom depth, sump and load rating

Planning a Stainless Steel Trench Drain specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.