Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Drenaje de sala limpia, equipos de higiene y seguridad
Acero inoxidable trench drain
Load-bearing stainless trench drain for higher washdown volumes and wheeled cleanroom equipment routes.
- Reinforced Load-Bearing Edges
- Grille higiénica extraíble
- Sloped Radiused Channel
- Cleanable Outlet Sump
Introducción del producto
The stainless steel trench drain provides a deeper, wider collection channel for clean manufacturing routes exposed to higher wash volumes or wheeled traffic. Reinforced edge rails support removable bar, ladder or hygienic grating, while a formed longitudinal fall guides water to a cleanable sump or direct outlet. Continuously welded radiused interiors remain accessible after the grate is lifted.
Características clave
Lift-out grating exposes the channel and sump for cleaning.
A built-in fall directs wash water and reduces stagnant zones.
Custom depth, width and outlet position suit the floor and hydraulic load.
Preocupaciones del producto del cliente
High-volume wash zones and wheeled routes require stronger channel edges and greater hydraulic capacity without sacrificing cleanability.
Trolley and equipment wheels can deform lightly supported drain edges.Reinforced stainless edge rails transfer loading into the surrounding floor structure.
Deep channels can hide sediment beneath fixed grating.Removable load-rated grates expose the full radiused channel and sump.
Large wash volumes may pond in a flat trench.A fabricated longitudinal fall and sized outlet guide flow toward the discharge point.
Standard channel depths may conflict with slab or utility constraints.Clear width, depth, section length and sump arrangement are configurable for the installation.
Aplicaciones típicas
Equipment wash areasSterile utility roomsClean manufacturing floorsHygienic logistics routes
Parámetros técnicos
Typical construction ranges for a load-bearing stainless trench are listed below; grate, depth and outlet are selected for flow, wheel load and floor build-up.
| Materiales Core | AISI 304 or 316L stainless steel channel and edge rails |
|---|---|
| Panel de espesor | 2.0-3.0 mm channel wall |
| Ancho efectivo | 150-500 mm clear trench width |
| Longitud máxima | Hasta 6000 mm por sección fabricada |
| Acero frente a espesor | 2.0-3.0 mm exposed stainless surfaces |
| Densidad Core | 7900 - 8000 kg / m3 para acero inoxidable |
| Conductividad térmica | 14 - 16 W / (m · K) para acero inoxidable |
| Superficie acabada | Acero inoxidable encurtido y pasivado o acabado satinado |
| Tipo conjunto | Continuously welded channel modules with flanged transport-section joints |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Grado 304 o 316L150-500 mm clear widthBar, ladder or hygienic grateCustom depth, sump and load rating
Planning a Stainless Steel Trench Drain specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
