Complete stainless steel trench drain in diagonal three-quarter view

クリーンルーム排水 · 衛生 · 安全設備

ステンレススチールトレンチドレイン

Load-bearing stainless trench drain for higher washdown volumes and wheeled cleanroom equipment routes.

Reinforced Load-Bearing Edges
取り外し可能な衛生的な格子
Sloped Radiused Channel
Cleanable Outlet Sump

商品紹介

The stainless steel trench drain provides a deeper, wider collection channel for clean manufacturing routes exposed to higher wash volumes or wheeled traffic. Reinforced edge rails support removable bar, ladder or hygienic grating, while a formed longitudinal fall guides water to a cleanable sump or direct outlet. Continuously welded radiused interiors remain accessible after the grate is lifted.

主要な特徴

Reinforced edge rails distribute wheel loads around the channel opening.

Lift-out grating exposes the channel and sump for cleaning.

A built-in fall directs wash water and reduces stagnant zones.

Custom depth, width and outlet position suit the floor and hydraulic load.

お客様の製品に関する懸念事項

High-volume wash zones and wheeled routes require stronger channel edges and greater hydraulic capacity without sacrificing cleanability.

Trolley and equipment wheels can deform lightly supported drain edges.Reinforced stainless edge rails transfer loading into the surrounding floor structure.

Deep channels can hide sediment beneath fixed grating.Removable load-rated grates expose the full radiused channel and sump.

Large wash volumes may pond in a flat trench.A fabricated longitudinal fall and sized outlet guide flow toward the discharge point.

Standard channel depths may conflict with slab or utility constraints.Clear width, depth, section length and sump arrangement are configurable for the installation.

典型的な用途

Equipment wash areasSterile utility roomsClean manufacturing floorsHygienic logistics routes

技術的なパラメータ

Typical construction ranges for a load-bearing stainless trench are listed below; grate, depth and outlet are selected for flow, wheel load and floor build-up.

コア材料	AISI 304 or 316L stainless steel channel and edge rails
パネルの厚さ	2.0-3.0 mm channel wall
有効幅	150-500 mm clear trench width
最大長さ	製造されたセクションあたり最大 6000 mm
鋼鉄の厚さを直面する	2.0-3.0 mm exposed stainless surfaces
コア密度	ステンレス鋼のための 7900 — 8000 kg / m3
熱伝導率	14 — 16 W / （ m · K ）ステンレス鋼
表面仕上げ	酸漬け、不動態化またはサテン仕上げステンレス鋼
ジョイントタイプ	Continuously welded channel modules with flanged transport-section joints
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

304 または 316L の等級150-500 mm clear widthBar, ladder or hygienic grateCustom depth, sump and load rating

Planning a Stainless Steel Trench Drain specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する