Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Drainage de salle blanche, équipement d'hygiène et de sécurité
Z Acier inoxydable Trench Drain
Load-bearing stainless trench drain for higher washdown volumes and wheeled cleanroom equipment routes.
- Reinforced Load-Bearing Edges
- Grille hygiénique amovible
- Sloped Radiused Channel
- Cleanable Outlet Sump
Introduction de produit
The stainless steel trench drain provides a deeper, wider collection channel for clean manufacturing routes exposed to higher wash volumes or wheeled traffic. Reinforced edge rails support removable bar, ladder or hygienic grating, while a formed longitudinal fall guides water to a cleanable sump or direct outlet. Continuously welded radiused interiors remain accessible after the grate is lifted.
Key Features
Lift-out grating exposes the channel and sump for cleaning.
A built-in fall directs wash water and reduces stagnant zones.
Custom depth, width and outlet position suit the floor and hydraulic load.
Préoccupations du client produit
High-volume wash zones and wheeled routes require stronger channel edges and greater hydraulic capacity without sacrificing cleanability.
Trolley and equipment wheels can deform lightly supported drain edges.Reinforced stainless edge rails transfer loading into the surrounding floor structure.
Deep channels can hide sediment beneath fixed grating.Removable load-rated grates expose the full radiused channel and sump.
Large wash volumes may pond in a flat trench.A fabricated longitudinal fall and sized outlet guide flow toward the discharge point.
Standard channel depths may conflict with slab or utility constraints.Clear width, depth, section length and sump arrangement are configurable for the installation.
Les applications typiques
Equipment wash areasSterile utility roomsClean manufacturing floorsHygienic logistics routes
Paramètres techniques
Typical construction ranges for a load-bearing stainless trench are listed below; grate, depth and outlet are selected for flow, wheel load and floor build-up.
| Matériaux de base | AISI 304 or 316L stainless steel channel and edge rails |
|---|---|
| Panneau épaisseur | 2.0-3.0 mm channel wall |
| Largeur effective | 150-500 mm clear trench width |
| Longueur maximale | Jusqu'à 6000 mm par section fabriquée |
| Acier face épaisseur | 2.0-3.0 mm exposed stainless surfaces |
| Densité Core | 7900 - 8000 kg / m3 pour l'acier inoxydable |
| Conductivité thermique | 14 - 16 W / (m · K) en acier inoxydable |
| surface finie | Acier inoxydable trempé et passivé ou finis satiné |
| Type joint | Continuously welded channel modules with flanged transport-section joints |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Grade 304 ou 316L150-500 mm clear widthBar, ladder or hygienic grateCustom depth, sump and load rating
Planning a Stainless Steel Trench Drain specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
