English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الصرف الصحي والنظافة والسلامة في الغرف النظيفة
الفولاذ المقاوم للصدأ خندق استنزاف
Load-bearing stainless trench drain for higher washdown volumes and wheeled cleanroom equipment routes.
- Reinforced Load-Bearing Edges
- Removable Hygienic Grating
- Sloped Radiused Channel
- Cleanable Outlet Sump
مقدمة المنتج
The stainless steel trench drain provides a deeper, wider collection channel for clean manufacturing routes exposed to higher wash volumes or wheeled traffic. Reinforced edge rails support removable bar, ladder or hygienic grating, while a formed longitudinal fall guides water to a cleanable sump or direct outlet. Continuously welded radiused interiors remain accessible after the grate is lifted.
الخصائص الرئيسية
Lift-out grating exposes the channel and sump for cleaning.
A built-in fall directs wash water and reduces stagnant zones.
Custom depth, width and outlet position suit the floor and hydraulic load.
مخاوف المنتج للعملاء
High-volume wash zones and wheeled routes require stronger channel edges and greater hydraulic capacity without sacrificing cleanability.
Trolley and equipment wheels can deform lightly supported drain edges.Reinforced stainless edge rails transfer loading into the surrounding floor structure.
Deep channels can hide sediment beneath fixed grating.Removable load-rated grates expose the full radiused channel and sump.
Large wash volumes may pond in a flat trench.A fabricated longitudinal fall and sized outlet guide flow toward the discharge point.
Standard channel depths may conflict with slab or utility constraints.Clear width, depth, section length and sump arrangement are configurable for the installation.
تطبيقات نموذجية
Equipment wash areasSterile utility roomsClean manufacturing floorsHygienic logistics routes
المعلمات الفنية
Typical construction ranges for a load-bearing stainless trench are listed below; grate, depth and outlet are selected for flow, wheel load and floor build-up.
| المواد الأساسية | AISI 304 or 316L stainless steel channel and edge rails |
|---|---|
| سمك اللوحة | 2.0-3.0 mm channel wall |
| العرض الفعال | 150-500 mm clear trench width |
| الحد الأقصى الطول | Up to 6000 mm per fabricated section |
| الصلب يواجه سمك | 2.0-3.0 mm exposed stainless surfaces |
| الكثافة الأساسية | 7900-8000 kg/m³ for stainless steel |
| الموصلية الحرارية | 14-16 W/(m·K) for stainless steel |
| إنهاء السطح | Pickled and passivated or satin-finished stainless steel |
| نوع المشترك | Continuously welded channel modules with flanged transport-section joints |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
304 or 316L grade150-500 mm clear widthBar, ladder or hygienic grateCustom depth, sump and load rating
Planning a Stainless Steel Trench Drain specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
