Complete stainless steel trench drain in diagonal three-quarter view

Дренажное оборудование, оборудование для гигиены и безопасности в чистых помещениях

Дренаж из нержавеющей стали Trench Drain

Load-bearing stainless trench drain for higher washdown volumes and wheeled cleanroom equipment routes.

Reinforced Load-Bearing Edges
Removable Hygienic Grating
Sloped Radiused Channel
Cleanable Outlet Sump

Введение продукции

The stainless steel trench drain provides a deeper, wider collection channel for clean manufacturing routes exposed to higher wash volumes or wheeled traffic. Reinforced edge rails support removable bar, ladder or hygienic grating, while a formed longitudinal fall guides water to a cleanable sump or direct outlet. Continuously welded radiused interiors remain accessible after the grate is lifted.

Основные характеристики

Reinforced edge rails distribute wheel loads around the channel opening.

Lift-out grating exposes the channel and sump for cleaning.

A built-in fall directs wash water and reduces stagnant zones.

Custom depth, width and outlet position suit the floor and hydraulic load.

Обеспокоенность клиентов продуктами

High-volume wash zones and wheeled routes require stronger channel edges and greater hydraulic capacity without sacrificing cleanability.

Trolley and equipment wheels can deform lightly supported drain edges.Reinforced stainless edge rails transfer loading into the surrounding floor structure.

Deep channels can hide sediment beneath fixed grating.Removable load-rated grates expose the full radiused channel and sump.

Large wash volumes may pond in a flat trench.A fabricated longitudinal fall and sized outlet guide flow toward the discharge point.

Standard channel depths may conflict with slab or utility constraints.Clear width, depth, section length and sump arrangement are configurable for the installation.

Типичные приложения

Equipment wash areasSterile utility roomsClean manufacturing floorsHygienic logistics routes

Технические параметры

Typical construction ranges for a load-bearing stainless trench are listed below; grate, depth and outlet are selected for flow, wheel load and floor build-up.

Основной материал	AISI 304 or 316L stainless steel channel and edge rails
Толщина панели	2.0-3.0 mm channel wall
эффективная ширина	150-500 mm clear trench width
Максимальная длина	Up to 6000 mm per fabricated section
Толщина линий стали	2.0-3.0 mm exposed stainless surfaces
Плотность ядра	7900 - 8000 кг / м3 для нержавеющей стали
Теплопроводимость	14 - 16 Вт / (м · К) для нержавеющей стали
Поверхностная отделка	Макарированная и пассивированная нержавеющая сталь или сатинная отделка
Объединенный тип	Continuously welded channel modules with flanged transport-section joints
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

304 or 316L grade150-500 mm clear widthBar, ladder or hygienic grateCustom depth, sump and load rating

Planning a Stainless Steel Trench Drain specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой