Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Móveis de sala limpa e produtos de aço inoxidável
Tray de aço inoxidável
A seamless Type 316L stainless deep tray with radiused internal corners, a reinforced rolled rim and polished low-retention surfaces for cleanroom instruments and components.
- Seamless deep-drawn body
- Radiused internal corners
- Reinforced rolled rim
- Polished 316L surface
Introdução do produto
The stainless steel tray provides an open, inspectable container for instruments, small process parts and weighed materials inside controlled environments. Its Type 316L sheet is deep drawn into a single body without welded corner seams. A rolled perimeter rim stiffens the opening and presents a smooth handling edge, while broad internal radii allow wiping from the base into each wall. The standard 535 × 330 × 95 mm format offers a useful deep-tray capacity without becoming difficult to lift or stage on a trolley shelf.
Características-chave
Broad base-to-wall radii let wipes follow the entire internal contour without sharp corner stops.
The rolled perimeter rim adds rigidity and provides a comfortable gloved handling edge.
A polished 316L finish supports visual inspection and straightforward residue removal.
Preocupações do produto do cliente
An open process tray must combine cleanable geometry, adequate wall depth and handling stiffness without creating hidden seams around the product-contact surface.
Residue remains in square internal corners after routine wiping.Continuous radii blend the tray base into all four walls.
A thin tray lip flexes when the loaded vessel is lifted with gloved hands.The rolled stainless rim reinforces the opening along its complete perimeter.
Weld discoloration and corner seams complicate visual cleanliness checks.The one-piece deep-drawn 316L body has no welded product-contact corners.
Shallow pans allow small parts to escape during internal transport.A 95 mm wall depth contains components while preserving open access from above.
Aplicações típicas
Cleanroom instrument stagingPharmaceutical component transferWeighed material containmentMedical-device parts preparationLaboratory sample organization
Parâmetros técnicos
Typical configurable specifications for a polished Type 316L cleanroom deep tray are listed below.
| Material principal | One-piece Type 316L stainless steel deep-drawn tray body |
|---|---|
| Painel de espessura | 1.0 mm deep-drawn tray wall and base |
| Largura efetiva | 330 mm nominal external tray width |
| Comprimento máximo | 535 mm nominal tray length |
| Aço enfrentando espessura | 1.0 mm Type 316L stainless sheet |
| Densidade Core | 7950–8050 kg/m³ for Type 316L stainless steel |
| Condutividade térmica | 14–16 W/(m·K) for Type 316L stainless steel |
| Superfície acabado | Mirror-polished internal and external surfaces, typically Ra ≤ 0.5 µm |
| Tipo conjunto | Seamless deep-drawn body with continuous rolled perimeter rim and radiused corners |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Perforated base patternFitted stainless knob lidElectropolished surfaceAlternative tray depths
Planning a Stainless Steel Tray specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
