Polished 316L stainless cleanroom deep tray with rolled rim

클린룸 가구 및 스테인레스 스틸 제품

스테인레스 스틸 트레이

A seamless Type 316L stainless deep tray with radiused internal corners, a reinforced rolled rim and polished low-retention surfaces for cleanroom instruments and components.

Seamless deep-drawn body
Radiused internal corners
Reinforced rolled rim
Polished 316L surface

견적 요청 제품 찾아보기

상품 소개

The stainless steel tray provides an open, inspectable container for instruments, small process parts and weighed materials inside controlled environments. Its Type 316L sheet is deep drawn into a single body without welded corner seams. A rolled perimeter rim stiffens the opening and presents a smooth handling edge, while broad internal radii allow wiping from the base into each wall. The standard 535 × 330 × 95 mm format offers a useful deep-tray capacity without becoming difficult to lift or stage on a trolley shelf.

주요 기능

A one-piece deep-drawn body removes welded seams from the product-contact cavity.

Broad base-to-wall radii let wipes follow the entire internal contour without sharp corner stops.

The rolled perimeter rim adds rigidity and provides a comfortable gloved handling edge.

A polished 316L finish supports visual inspection and straightforward residue removal.

고객 제품 관심사

An open process tray must combine cleanable geometry, adequate wall depth and handling stiffness without creating hidden seams around the product-contact surface.

Residue remains in square internal corners after routine wiping.Continuous radii blend the tray base into all four walls.

A thin tray lip flexes when the loaded vessel is lifted with gloved hands.The rolled stainless rim reinforces the opening along its complete perimeter.

Weld discoloration and corner seams complicate visual cleanliness checks.The one-piece deep-drawn 316L body has no welded product-contact corners.

Shallow pans allow small parts to escape during internal transport.A 95 mm wall depth contains components while preserving open access from above.

일반적인 응용 프로그램

Cleanroom instrument stagingPharmaceutical component transferWeighed material containmentMedical-device parts preparationLaboratory sample organization

기술 매개변수

Typical configurable specifications for a polished Type 316L cleanroom deep tray are listed below.

핵심 재료	One-piece Type 316L stainless steel deep-drawn tray body
패널 두께	1.0 mm deep-drawn tray wall and base
유효 폭	330 mm nominal external tray width
최대 길이	535 mm nominal tray length
강철 면면 두께	1.0 mm Type 316L stainless sheet
코어 밀도	7950–8050 kg/m³ for Type 316L stainless steel
열전도도 (Thermal Conductivity)	14–16 W/(m·K) for Type 316L stainless steel
표면 마무리	Mirror-polished internal and external surfaces, typically Ra ≤ 0.5 µm
접합 유형	Seamless deep-drawn body with continuous rolled perimeter rim and radiused corners
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Perforated base patternFitted stainless knob lidElectropolished surfaceAlternative tray depths

Planning a Stainless Steel Tray specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.