Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Muebles de sala limpia y productos de acero inoxidable
Tray de acero inoxidable
A seamless Type 316L stainless deep tray with radiused internal corners, a reinforced rolled rim and polished low-retention surfaces for cleanroom instruments and components.
- Seamless deep-drawn body
- Radiused internal corners
- Reinforced rolled rim
- Polished 316L surface
Introducción del producto
The stainless steel tray provides an open, inspectable container for instruments, small process parts and weighed materials inside controlled environments. Its Type 316L sheet is deep drawn into a single body without welded corner seams. A rolled perimeter rim stiffens the opening and presents a smooth handling edge, while broad internal radii allow wiping from the base into each wall. The standard 535 × 330 × 95 mm format offers a useful deep-tray capacity without becoming difficult to lift or stage on a trolley shelf.
Características clave
Broad base-to-wall radii let wipes follow the entire internal contour without sharp corner stops.
The rolled perimeter rim adds rigidity and provides a comfortable gloved handling edge.
A polished 316L finish supports visual inspection and straightforward residue removal.
Preocupaciones del producto del cliente
An open process tray must combine cleanable geometry, adequate wall depth and handling stiffness without creating hidden seams around the product-contact surface.
Residue remains in square internal corners after routine wiping.Continuous radii blend the tray base into all four walls.
A thin tray lip flexes when the loaded vessel is lifted with gloved hands.The rolled stainless rim reinforces the opening along its complete perimeter.
Weld discoloration and corner seams complicate visual cleanliness checks.The one-piece deep-drawn 316L body has no welded product-contact corners.
Shallow pans allow small parts to escape during internal transport.A 95 mm wall depth contains components while preserving open access from above.
Aplicaciones típicas
Cleanroom instrument stagingPharmaceutical component transferWeighed material containmentMedical-device parts preparationLaboratory sample organization
Parámetros técnicos
Typical configurable specifications for a polished Type 316L cleanroom deep tray are listed below.
| Materiales Core | One-piece Type 316L stainless steel deep-drawn tray body |
|---|---|
| Panel de espesor | 1.0 mm deep-drawn tray wall and base |
| Ancho efectivo | 330 mm nominal external tray width |
| Longitud máxima | 535 mm nominal tray length |
| Acero frente a espesor | 1.0 mm Type 316L stainless sheet |
| Densidad Core | 7950–8050 kg/m³ for Type 316L stainless steel |
| Conductividad térmica | 14–16 W/(m·K) for Type 316L stainless steel |
| Superficie acabada | Mirror-polished internal and external surfaces, typically Ra ≤ 0.5 µm |
| Tipo conjunto | Seamless deep-drawn body with continuous rolled perimeter rim and radiused corners |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Perforated base patternFitted stainless knob lidElectropolished surfaceAlternative tray depths
Planning a Stainless Steel Tray specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
