English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
صينية الفولاذ المقاوم للصدأ
A seamless Type 316L stainless deep tray with radiused internal corners, a reinforced rolled rim and polished low-retention surfaces for cleanroom instruments and components.
- Seamless deep-drawn body
- Radiused internal corners
- Reinforced rolled rim
- Polished 316L surface
مقدمة المنتج
The stainless steel tray provides an open, inspectable container for instruments, small process parts and weighed materials inside controlled environments. Its Type 316L sheet is deep drawn into a single body without welded corner seams. A rolled perimeter rim stiffens the opening and presents a smooth handling edge, while broad internal radii allow wiping from the base into each wall. The standard 535 × 330 × 95 mm format offers a useful deep-tray capacity without becoming difficult to lift or stage on a trolley shelf.
الخصائص الرئيسية
Broad base-to-wall radii let wipes follow the entire internal contour without sharp corner stops.
The rolled perimeter rim adds rigidity and provides a comfortable gloved handling edge.
A polished 316L finish supports visual inspection and straightforward residue removal.
مخاوف المنتج للعملاء
An open process tray must combine cleanable geometry, adequate wall depth and handling stiffness without creating hidden seams around the product-contact surface.
Residue remains in square internal corners after routine wiping.Continuous radii blend the tray base into all four walls.
A thin tray lip flexes when the loaded vessel is lifted with gloved hands.The rolled stainless rim reinforces the opening along its complete perimeter.
Weld discoloration and corner seams complicate visual cleanliness checks.The one-piece deep-drawn 316L body has no welded product-contact corners.
Shallow pans allow small parts to escape during internal transport.A 95 mm wall depth contains components while preserving open access from above.
تطبيقات نموذجية
Cleanroom instrument stagingPharmaceutical component transferWeighed material containmentMedical-device parts preparationLaboratory sample organization
المعلمات الفنية
Typical configurable specifications for a polished Type 316L cleanroom deep tray are listed below.
| المواد الأساسية | One-piece Type 316L stainless steel deep-drawn tray body |
|---|---|
| سمك اللوحة | 1.0 mm deep-drawn tray wall and base |
| العرض الفعال | 330 mm nominal external tray width |
| الحد الأقصى الطول | 535 mm nominal tray length |
| الصلب يواجه سمك | 1.0 mm Type 316L stainless sheet |
| الكثافة الأساسية | 7950–8050 kg/m³ for Type 316L stainless steel |
| الموصلية الحرارية | 14–16 W/(m·K) for Type 316L stainless steel |
| إنهاء السطح | Mirror-polished internal and external surfaces, typically Ra ≤ 0.5 µm |
| نوع المشترك | Seamless deep-drawn body with continuous rolled perimeter rim and radiused corners |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Perforated base patternFitted stainless knob lidElectropolished surfaceAlternative tray depths
Planning a Stainless Steel Tray specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
