Polished 316L stainless cleanroom deep tray with rolled rim

クリーンルーム家具 · ステンレス製品

ステンレス鋼のトレイ

A seamless Type 316L stainless deep tray with radiused internal corners, a reinforced rolled rim and polished low-retention surfaces for cleanroom instruments and components.

Seamless deep-drawn body
Radiused internal corners
Reinforced rolled rim
Polished 316L surface

見積もりリクエスト製品案内

商品紹介

The stainless steel tray provides an open, inspectable container for instruments, small process parts and weighed materials inside controlled environments. Its Type 316L sheet is deep drawn into a single body without welded corner seams. A rolled perimeter rim stiffens the opening and presents a smooth handling edge, while broad internal radii allow wiping from the base into each wall. The standard 535 × 330 × 95 mm format offers a useful deep-tray capacity without becoming difficult to lift or stage on a trolley shelf.

主要な特徴

A one-piece deep-drawn body removes welded seams from the product-contact cavity.

Broad base-to-wall radii let wipes follow the entire internal contour without sharp corner stops.

The rolled perimeter rim adds rigidity and provides a comfortable gloved handling edge.

A polished 316L finish supports visual inspection and straightforward residue removal.

お客様の製品に関する懸念事項

An open process tray must combine cleanable geometry, adequate wall depth and handling stiffness without creating hidden seams around the product-contact surface.

Residue remains in square internal corners after routine wiping.Continuous radii blend the tray base into all four walls.

A thin tray lip flexes when the loaded vessel is lifted with gloved hands.The rolled stainless rim reinforces the opening along its complete perimeter.

Weld discoloration and corner seams complicate visual cleanliness checks.The one-piece deep-drawn 316L body has no welded product-contact corners.

Shallow pans allow small parts to escape during internal transport.A 95 mm wall depth contains components while preserving open access from above.

典型的な用途

Cleanroom instrument stagingPharmaceutical component transferWeighed material containmentMedical-device parts preparationLaboratory sample organization

技術的なパラメータ

Typical configurable specifications for a polished Type 316L cleanroom deep tray are listed below.

コア材料	One-piece Type 316L stainless steel deep-drawn tray body
パネルの厚さ	1.0 mm deep-drawn tray wall and base
有効幅	330 mm nominal external tray width
最大長さ	535 mm nominal tray length
鋼鉄の厚さを直面する	1.0 mm Type 316L stainless sheet
コア密度	タイプ 316L のステンレス鋼のための 7950 — 8050 kg / m3
熱伝導率	14–16 W/(m·K) for Type 316L stainless steel
表面仕上げ	Mirror-polished internal and external surfaces, typically Ra ≤ 0.5 µm
ジョイントタイプ	Seamless deep-drawn body with continuous rolled perimeter rim and radiused corners
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Perforated base patternFitted stainless knob lidElectropolished surfaceAlternative tray depths

Planning a Stainless Steel Tray specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する