Polished 316L stainless cleanroom deep tray with rolled rim

Perabot bilik bersih dan produk keluli tahan karat

Dulang keluli tahan karat

A seamless Type 316L stainless deep tray with radiused internal corners, a reinforced rolled rim and polished low-retention surfaces for cleanroom instruments and components.

Seamless deep-drawn body
Radiused internal corners
Reinforced rolled rim
Polished 316L surface

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The stainless steel tray provides an open, inspectable container for instruments, small process parts and weighed materials inside controlled environments. Its Type 316L sheet is deep drawn into a single body without welded corner seams. A rolled perimeter rim stiffens the opening and presents a smooth handling edge, while broad internal radii allow wiping from the base into each wall. The standard 535 × 330 × 95 mm format offers a useful deep-tray capacity without becoming difficult to lift or stage on a trolley shelf.

Ciri-ciri Utama

A one-piece deep-drawn body removes welded seams from the product-contact cavity.

Broad base-to-wall radii let wipes follow the entire internal contour without sharp corner stops.

The rolled perimeter rim adds rigidity and provides a comfortable gloved handling edge.

A polished 316L finish supports visual inspection and straightforward residue removal.

Kebimbangan Produk Pelanggan

An open process tray must combine cleanable geometry, adequate wall depth and handling stiffness without creating hidden seams around the product-contact surface.

Residue remains in square internal corners after routine wiping.Continuous radii blend the tray base into all four walls.

A thin tray lip flexes when the loaded vessel is lifted with gloved hands.The rolled stainless rim reinforces the opening along its complete perimeter.

Weld discoloration and corner seams complicate visual cleanliness checks.The one-piece deep-drawn 316L body has no welded product-contact corners.

Shallow pans allow small parts to escape during internal transport.A 95 mm wall depth contains components while preserving open access from above.

Permohonan yang biasa

Cleanroom instrument stagingPharmaceutical component transferWeighed material containmentMedical-device parts preparationLaboratory sample organization

Parameter teknikal

Typical configurable specifications for a polished Type 316L cleanroom deep tray are listed below.

Bahan Teras	One-piece Type 316L stainless steel deep-drawn tray body
Ketebalan Panel	1.0 mm deep-drawn tray wall and base
Lebar berkesan	330 mm nominal external tray width
Panjang maksimum	535 mm nominal tray length
Keluli Menghadapi Ketebalan	1.0 mm Type 316L stainless sheet
Ketumpatan teras	7950–8050 kg/m³ for Type 316L stainless steel
Kekonduksian Terma	14–16 W/(m·K) for Type 316L stainless steel
Kemasan permukaan	Mirror-polished internal and external surfaces, typically Ra ≤ 0.5 µm
Jenis Bersatu	Seamless deep-drawn body with continuous rolled perimeter rim and radiused corners
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Perforated base patternFitted stainless knob lidElectropolished surfaceAlternative tray depths

Planning a Stainless Steel Tray specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami