İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Mobilyaları ve Paslanmaz Çelik Ürünleri
paslanmaz çelik tepsisi
A seamless Type 316L stainless deep tray with radiused internal corners, a reinforced rolled rim and polished low-retention surfaces for cleanroom instruments and components.
- Seamless deep-drawn body
- Radiused internal corners
- Reinforced rolled rim
- Polished 316L surface
Ürün tanıtımı
The stainless steel tray provides an open, inspectable container for instruments, small process parts and weighed materials inside controlled environments. Its Type 316L sheet is deep drawn into a single body without welded corner seams. A rolled perimeter rim stiffens the opening and presents a smooth handling edge, while broad internal radii allow wiping from the base into each wall. The standard 535 × 330 × 95 mm format offers a useful deep-tray capacity without becoming difficult to lift or stage on a trolley shelf.
Ana Özellikler
Broad base-to-wall radii let wipes follow the entire internal contour without sharp corner stops.
The rolled perimeter rim adds rigidity and provides a comfortable gloved handling edge.
A polished 316L finish supports visual inspection and straightforward residue removal.
Müşteri Ürün Sorunları
An open process tray must combine cleanable geometry, adequate wall depth and handling stiffness without creating hidden seams around the product-contact surface.
Residue remains in square internal corners after routine wiping.Continuous radii blend the tray base into all four walls.
A thin tray lip flexes when the loaded vessel is lifted with gloved hands.The rolled stainless rim reinforces the opening along its complete perimeter.
Weld discoloration and corner seams complicate visual cleanliness checks.The one-piece deep-drawn 316L body has no welded product-contact corners.
Shallow pans allow small parts to escape during internal transport.A 95 mm wall depth contains components while preserving open access from above.
Tipik uygulamalar
Cleanroom instrument stagingPharmaceutical component transferWeighed material containmentMedical-device parts preparationLaboratory sample organization
Teknik parametreler
Typical configurable specifications for a polished Type 316L cleanroom deep tray are listed below.
| Temel malzemeler | One-piece Type 316L stainless steel deep-drawn tray body |
|---|---|
| Panel kalınlığı | 1.0 mm deep-drawn tray wall and base |
| Effective Width (Etkili Genişlik) | 330 mm nominal external tray width |
| Maksimum uzunluk | 535 mm nominal tray length |
| Çelik yüz yüze kalınlığı | 1.0 mm Type 316L stainless sheet |
| Core Density (Çekirdek Yoğunluğu) | 7950–8050 kg/m³ for Type 316L stainless steel |
| Termal İletkenlik | 14–16 W/(m·K) for Type 316L stainless steel |
| Yüzey bitirme | Mirror-polished internal and external surfaces, typically Ra ≤ 0.5 µm |
| Ortak tip | Seamless deep-drawn body with continuous rolled perimeter rim and radiused corners |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Perforated base patternFitted stainless knob lidElectropolished surfaceAlternative tray depths
Planning a Stainless Steel Tray specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
