Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamentos de drenagem, higiene e segurança da sala limpa
Aço Inoxidável Drain Piping
Thin-wall 304 or 316L stainless drainage pipe and fittings with sealed socket joints for clean gravity or vacuum waste networks.
- 304 or 316L Stainless Construction
- Sealed Push-Fit Socket Joints
- Smooth Corrosion-Resistant Bore
- Gravity and Vacuum Configurations
Introdução do produto
Stainless steel drain piping provides a light, corrosion-resistant alternative to heavy cast drainage systems in controlled facilities. Straight tubes, bends, branches, reducers and cleanouts use factory-formed spigots and sockets, allowing rapid assembly with limited hot work. Material grade and elastomer selection can be matched to the conveyed waste, cleaning chemistry and operating temperature.
Características-chave
Smooth internal surfaces limit residue retention and support predictable drainage flow.
Push-fit sockets use replaceable elastomer seals and allow fittings to be dismantled for alteration.
A coordinated range of branches, bends and reducers supports prefabricated utility layouts.
Preocupações do produto do cliente
Controlled facilities need drain pipework that resists cleaning chemicals, fits congested service zones and can be assembled without unnecessary contamination-producing site work.
Conventional drainage materials may corrode or shed surface material under repeated chemical cleaning.304 or 316L stainless tube provides a durable, cleanable exposed and internal surface.
Welding every fitting increases installation time and hot-work controls.Factory-formed push-fit sockets connect straight pipe and fittings with replaceable seals.
Incorrect elastomers can swell or lose sealing performance in chemical waste service.EPDM, NBR or FKM seals are selected to suit the expected liquid and temperature range.
Congested ceiling and service zones require frequent changes of direction and diameter.Matched bends, branches, reducers and cleanouts support compact prefabricated routing.
Aplicações típicas
Cleanroom sanitary drainageLaboratory waste networksProcess equipment dischargeVacuum drainage pipework
Parâmetros técnicos
Typical catalog ranges for stainless drainage tube and fittings are shown below; diameter, grade and seal compound are selected for the waste stream and pressure regime.
| Material principal | AISI 304 or 316L stainless steel tube and fittings |
|---|---|
| Painel de espessura | 0.8-2.0 mm tube wall |
| Largura efetiva | 40-250 mm outside diameter |
| Comprimento máximo | Up to 6000 mm straight tube length |
| Aço enfrentando espessura | 0.8-2.0 mm stainless wall |
| Densidade Core | 7900 - 8000 kg / m3 para aço inoxidável |
| Condutividade térmica | 14 - 16 W / (m · K) para aço inoxidável |
| Superfície acabado | Acid-pickled natural silver matt finish; optional external satin finish |
| Tipo conjunto | Push-fit stainless socket with EPDM, NBR or FKM elastomer seal |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Grau 304 ou 316LEPDM, NBR or FKM sealsStraight tubes and swept bendsBranches, reducers and cleanout fittings
Planning a Stainless Steel Drain Piping specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
