Complete stainless steel cleanroom drain piping and fitting set in three-quarter view

클린룸 배수, 위생 및 안전 장비

스테인레스 스틸 배수 파이프

Thin-wall 304 or 316L stainless drainage pipe and fittings with sealed socket joints for clean gravity or vacuum waste networks.

304 or 316L Stainless Construction
Sealed Push-Fit Socket Joints
Smooth Corrosion-Resistant Bore
Gravity and Vacuum Configurations

견적 요청 제품 찾아보기

상품 소개

Stainless steel drain piping provides a light, corrosion-resistant alternative to heavy cast drainage systems in controlled facilities. Straight tubes, bends, branches, reducers and cleanouts use factory-formed spigots and sockets, allowing rapid assembly with limited hot work. Material grade and elastomer selection can be matched to the conveyed waste, cleaning chemistry and operating temperature.

주요 기능

Thin-wall stainless construction combines mechanical strength with lower installed weight.

Smooth internal surfaces limit residue retention and support predictable drainage flow.

Push-fit sockets use replaceable elastomer seals and allow fittings to be dismantled for alteration.

A coordinated range of branches, bends and reducers supports prefabricated utility layouts.

고객 제품 관심사

Controlled facilities need drain pipework that resists cleaning chemicals, fits congested service zones and can be assembled without unnecessary contamination-producing site work.

Conventional drainage materials may corrode or shed surface material under repeated chemical cleaning.304 or 316L stainless tube provides a durable, cleanable exposed and internal surface.

Welding every fitting increases installation time and hot-work controls.Factory-formed push-fit sockets connect straight pipe and fittings with replaceable seals.

Incorrect elastomers can swell or lose sealing performance in chemical waste service.EPDM, NBR or FKM seals are selected to suit the expected liquid and temperature range.

Congested ceiling and service zones require frequent changes of direction and diameter.Matched bends, branches, reducers and cleanouts support compact prefabricated routing.

일반적인 응용 프로그램

Cleanroom sanitary drainageLaboratory waste networksProcess equipment dischargeVacuum drainage pipework

기술 매개변수

Typical catalog ranges for stainless drainage tube and fittings are shown below; diameter, grade and seal compound are selected for the waste stream and pressure regime.

핵심 재료	AISI 304 or 316L stainless steel tube and fittings
패널 두께	0.8-2.0 mm tube wall
유효 폭	40-250 mm outside diameter
최대 길이	Up to 6000 mm straight tube length
강철 면면 두께	0.8-2.0 mm stainless wall
코어 밀도	7900 - 8000 kg / m 3 스테인레스 스틸
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 스테인레스 스틸
표면 마무리	Acid-pickled natural silver matt finish; optional external satin finish
접합 유형	Push-fit stainless socket with EPDM, NBR or FKM elastomer seal
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

304 또는 316 L 등급EPDM, NBR or FKM sealsStraight tubes and swept bendsBranches, reducers and cleanout fittings

Planning a Stainless Steel Drain Piping specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.