Complete stainless steel cleanroom drain piping and fitting set in three-quarter view

クリーンルーム排水 · 衛生 · 安全設備

ステンレス鋼の排水配管

Thin-wall 304 or 316L stainless drainage pipe and fittings with sealed socket joints for clean gravity or vacuum waste networks.

304 or 316L Stainless Construction
Sealed Push-Fit Socket Joints
Smooth Corrosion-Resistant Bore
Gravity and Vacuum Configurations

見積もりリクエスト製品案内

商品紹介

Stainless steel drain piping provides a light, corrosion-resistant alternative to heavy cast drainage systems in controlled facilities. Straight tubes, bends, branches, reducers and cleanouts use factory-formed spigots and sockets, allowing rapid assembly with limited hot work. Material grade and elastomer selection can be matched to the conveyed waste, cleaning chemistry and operating temperature.

主要な特徴

Thin-wall stainless construction combines mechanical strength with lower installed weight.

Smooth internal surfaces limit residue retention and support predictable drainage flow.

Push-fit sockets use replaceable elastomer seals and allow fittings to be dismantled for alteration.

A coordinated range of branches, bends and reducers supports prefabricated utility layouts.

お客様の製品に関する懸念事項

Controlled facilities need drain pipework that resists cleaning chemicals, fits congested service zones and can be assembled without unnecessary contamination-producing site work.

Conventional drainage materials may corrode or shed surface material under repeated chemical cleaning.304 or 316L stainless tube provides a durable, cleanable exposed and internal surface.

Welding every fitting increases installation time and hot-work controls.Factory-formed push-fit sockets connect straight pipe and fittings with replaceable seals.

Incorrect elastomers can swell or lose sealing performance in chemical waste service.EPDM, NBR or FKM seals are selected to suit the expected liquid and temperature range.

Congested ceiling and service zones require frequent changes of direction and diameter.Matched bends, branches, reducers and cleanouts support compact prefabricated routing.

典型的な用途

Cleanroom sanitary drainageLaboratory waste networksProcess equipment dischargeVacuum drainage pipework

技術的なパラメータ

Typical catalog ranges for stainless drainage tube and fittings are shown below; diameter, grade and seal compound are selected for the waste stream and pressure regime.

コア材料	AISI 304 or 316L stainless steel tube and fittings
パネルの厚さ	0.8-2.0 mm tube wall
有効幅	40-250 mm outside diameter
最大長さ	Up to 6000 mm straight tube length
鋼鉄の厚さを直面する	0.8-2.0 mm stainless wall
コア密度	ステンレス鋼のための 7900 — 8000 kg / m3
熱伝導率	14 — 16 W / （ m · K ）ステンレス鋼
表面仕上げ	Acid-pickled natural silver matt finish; optional external satin finish
ジョイントタイプ	Push-fit stainless socket with EPDM, NBR or FKM elastomer seal
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

304 または 316L の等級EPDM, NBR or FKM sealsStraight tubes and swept bendsBranches, reducers and cleanout fittings

Planning a Stainless Steel Drain Piping specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する