Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Drenaje de sala limpia, equipos de higiene y seguridad
Acero inoxidable drenaje tubería
Thin-wall 304 or 316L stainless drainage pipe and fittings with sealed socket joints for clean gravity or vacuum waste networks.
- 304 or 316L Stainless Construction
- Sealed Push-Fit Socket Joints
- Smooth Corrosion-Resistant Bore
- Gravity and Vacuum Configurations
Introducción del producto
Stainless steel drain piping provides a light, corrosion-resistant alternative to heavy cast drainage systems in controlled facilities. Straight tubes, bends, branches, reducers and cleanouts use factory-formed spigots and sockets, allowing rapid assembly with limited hot work. Material grade and elastomer selection can be matched to the conveyed waste, cleaning chemistry and operating temperature.
Características clave
Smooth internal surfaces limit residue retention and support predictable drainage flow.
Push-fit sockets use replaceable elastomer seals and allow fittings to be dismantled for alteration.
A coordinated range of branches, bends and reducers supports prefabricated utility layouts.
Preocupaciones del producto del cliente
Controlled facilities need drain pipework that resists cleaning chemicals, fits congested service zones and can be assembled without unnecessary contamination-producing site work.
Conventional drainage materials may corrode or shed surface material under repeated chemical cleaning.304 or 316L stainless tube provides a durable, cleanable exposed and internal surface.
Welding every fitting increases installation time and hot-work controls.Factory-formed push-fit sockets connect straight pipe and fittings with replaceable seals.
Incorrect elastomers can swell or lose sealing performance in chemical waste service.EPDM, NBR or FKM seals are selected to suit the expected liquid and temperature range.
Congested ceiling and service zones require frequent changes of direction and diameter.Matched bends, branches, reducers and cleanouts support compact prefabricated routing.
Aplicaciones típicas
Cleanroom sanitary drainageLaboratory waste networksProcess equipment dischargeVacuum drainage pipework
Parámetros técnicos
Typical catalog ranges for stainless drainage tube and fittings are shown below; diameter, grade and seal compound are selected for the waste stream and pressure regime.
| Materiales Core | AISI 304 or 316L stainless steel tube and fittings |
|---|---|
| Panel de espesor | 0.8-2.0 mm tube wall |
| Ancho efectivo | 40-250 mm outside diameter |
| Longitud máxima | Up to 6000 mm straight tube length |
| Acero frente a espesor | 0.8-2.0 mm stainless wall |
| Densidad Core | 7900 - 8000 kg / m3 para acero inoxidable |
| Conductividad térmica | 14 - 16 W / (m · K) para acero inoxidable |
| Superficie acabada | Acid-pickled natural silver matt finish; optional external satin finish |
| Tipo conjunto | Push-fit stainless socket with EPDM, NBR or FKM elastomer seal |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Grado 304 o 316LEPDM, NBR or FKM sealsStraight tubes and swept bendsBranches, reducers and cleanout fittings
Planning a Stainless Steel Drain Piping specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
