English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Дренажное оборудование, оборудование для гигиены и безопасности в чистых помещениях
Дренажная труба из нержавеющей стали
Thin-wall 304 or 316L stainless drainage pipe and fittings with sealed socket joints for clean gravity or vacuum waste networks.
- 304 or 316L Stainless Construction
- Sealed Push-Fit Socket Joints
- Smooth Corrosion-Resistant Bore
- Gravity and Vacuum Configurations
Введение продукции
Stainless steel drain piping provides a light, corrosion-resistant alternative to heavy cast drainage systems in controlled facilities. Straight tubes, bends, branches, reducers and cleanouts use factory-formed spigots and sockets, allowing rapid assembly with limited hot work. Material grade and elastomer selection can be matched to the conveyed waste, cleaning chemistry and operating temperature.
Основные характеристики
Smooth internal surfaces limit residue retention and support predictable drainage flow.
Push-fit sockets use replaceable elastomer seals and allow fittings to be dismantled for alteration.
A coordinated range of branches, bends and reducers supports prefabricated utility layouts.
Обеспокоенность клиентов продуктами
Controlled facilities need drain pipework that resists cleaning chemicals, fits congested service zones and can be assembled without unnecessary contamination-producing site work.
Conventional drainage materials may corrode or shed surface material under repeated chemical cleaning.304 or 316L stainless tube provides a durable, cleanable exposed and internal surface.
Welding every fitting increases installation time and hot-work controls.Factory-formed push-fit sockets connect straight pipe and fittings with replaceable seals.
Incorrect elastomers can swell or lose sealing performance in chemical waste service.EPDM, NBR or FKM seals are selected to suit the expected liquid and temperature range.
Congested ceiling and service zones require frequent changes of direction and diameter.Matched bends, branches, reducers and cleanouts support compact prefabricated routing.
Типичные приложения
Cleanroom sanitary drainageLaboratory waste networksProcess equipment dischargeVacuum drainage pipework
Технические параметры
Typical catalog ranges for stainless drainage tube and fittings are shown below; diameter, grade and seal compound are selected for the waste stream and pressure regime.
| Основной материал | AISI 304 or 316L stainless steel tube and fittings |
|---|---|
| Толщина панели | 0.8-2.0 mm tube wall |
| эффективная ширина | 40-250 mm outside diameter |
| Максимальная длина | Up to 6000 mm straight tube length |
| Толщина линий стали | 0.8-2.0 mm stainless wall |
| Плотность ядра | 7900 - 8000 кг / м3 для нержавеющей стали |
| Теплопроводимость | 14 - 16 Вт / (м · К) для нержавеющей стали |
| Поверхностная отделка | Acid-pickled natural silver matt finish; optional external satin finish |
| Объединенный тип | Push-fit stainless socket with EPDM, NBR or FKM elastomer seal |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
304 or 316L gradeEPDM, NBR or FKM sealsStraight tubes and swept bendsBranches, reducers and cleanout fittings
Planning a Stainless Steel Drain Piping specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
