Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Drainage de salle blanche, équipement d'hygiène et de sécurité
acier inoxydable drain piping
Thin-wall 304 or 316L stainless drainage pipe and fittings with sealed socket joints for clean gravity or vacuum waste networks.
- 304 or 316L Stainless Construction
- Sealed Push-Fit Socket Joints
- Smooth Corrosion-Resistant Bore
- Gravity and Vacuum Configurations
Introduction de produit
Stainless steel drain piping provides a light, corrosion-resistant alternative to heavy cast drainage systems in controlled facilities. Straight tubes, bends, branches, reducers and cleanouts use factory-formed spigots and sockets, allowing rapid assembly with limited hot work. Material grade and elastomer selection can be matched to the conveyed waste, cleaning chemistry and operating temperature.
Key Features
Smooth internal surfaces limit residue retention and support predictable drainage flow.
Push-fit sockets use replaceable elastomer seals and allow fittings to be dismantled for alteration.
A coordinated range of branches, bends and reducers supports prefabricated utility layouts.
Préoccupations du client produit
Controlled facilities need drain pipework that resists cleaning chemicals, fits congested service zones and can be assembled without unnecessary contamination-producing site work.
Conventional drainage materials may corrode or shed surface material under repeated chemical cleaning.304 or 316L stainless tube provides a durable, cleanable exposed and internal surface.
Welding every fitting increases installation time and hot-work controls.Factory-formed push-fit sockets connect straight pipe and fittings with replaceable seals.
Incorrect elastomers can swell or lose sealing performance in chemical waste service.EPDM, NBR or FKM seals are selected to suit the expected liquid and temperature range.
Congested ceiling and service zones require frequent changes of direction and diameter.Matched bends, branches, reducers and cleanouts support compact prefabricated routing.
Les applications typiques
Cleanroom sanitary drainageLaboratory waste networksProcess equipment dischargeVacuum drainage pipework
Paramètres techniques
Typical catalog ranges for stainless drainage tube and fittings are shown below; diameter, grade and seal compound are selected for the waste stream and pressure regime.
| Matériaux de base | AISI 304 or 316L stainless steel tube and fittings |
|---|---|
| Panneau épaisseur | 0.8-2.0 mm tube wall |
| Largeur effective | 40-250 mm outside diameter |
| Longueur maximale | Up to 6000 mm straight tube length |
| Acier face épaisseur | 0.8-2.0 mm stainless wall |
| Densité Core | 7900 - 8000 kg / m3 pour l'acier inoxydable |
| Conductivité thermique | 14 - 16 W / (m · K) en acier inoxydable |
| surface finie | Acid-pickled natural silver matt finish; optional external satin finish |
| Type joint | Push-fit stainless socket with EPDM, NBR or FKM elastomer seal |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Grade 304 ou 316LEPDM, NBR or FKM sealsStraight tubes and swept bendsBranches, reducers and cleanout fittings
Planning a Stainless Steel Drain Piping specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
