English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الصرف الصحي والنظافة والسلامة في الغرف النظيفة
الفولاذ المقاوم للصدأ استنزاف الأنابيب
Thin-wall 304 or 316L stainless drainage pipe and fittings with sealed socket joints for clean gravity or vacuum waste networks.
- 304 or 316L Stainless Construction
- Sealed Push-Fit Socket Joints
- Smooth Corrosion-Resistant Bore
- Gravity and Vacuum Configurations
مقدمة المنتج
Stainless steel drain piping provides a light, corrosion-resistant alternative to heavy cast drainage systems in controlled facilities. Straight tubes, bends, branches, reducers and cleanouts use factory-formed spigots and sockets, allowing rapid assembly with limited hot work. Material grade and elastomer selection can be matched to the conveyed waste, cleaning chemistry and operating temperature.
الخصائص الرئيسية
Smooth internal surfaces limit residue retention and support predictable drainage flow.
Push-fit sockets use replaceable elastomer seals and allow fittings to be dismantled for alteration.
A coordinated range of branches, bends and reducers supports prefabricated utility layouts.
مخاوف المنتج للعملاء
Controlled facilities need drain pipework that resists cleaning chemicals, fits congested service zones and can be assembled without unnecessary contamination-producing site work.
Conventional drainage materials may corrode or shed surface material under repeated chemical cleaning.304 or 316L stainless tube provides a durable, cleanable exposed and internal surface.
Welding every fitting increases installation time and hot-work controls.Factory-formed push-fit sockets connect straight pipe and fittings with replaceable seals.
Incorrect elastomers can swell or lose sealing performance in chemical waste service.EPDM, NBR or FKM seals are selected to suit the expected liquid and temperature range.
Congested ceiling and service zones require frequent changes of direction and diameter.Matched bends, branches, reducers and cleanouts support compact prefabricated routing.
تطبيقات نموذجية
Cleanroom sanitary drainageLaboratory waste networksProcess equipment dischargeVacuum drainage pipework
المعلمات الفنية
Typical catalog ranges for stainless drainage tube and fittings are shown below; diameter, grade and seal compound are selected for the waste stream and pressure regime.
| المواد الأساسية | AISI 304 or 316L stainless steel tube and fittings |
|---|---|
| سمك اللوحة | 0.8-2.0 mm tube wall |
| العرض الفعال | 40-250 mm outside diameter |
| الحد الأقصى الطول | Up to 6000 mm straight tube length |
| الصلب يواجه سمك | 0.8-2.0 mm stainless wall |
| الكثافة الأساسية | 7900-8000 kg/m³ for stainless steel |
| الموصلية الحرارية | 14-16 W/(m·K) for stainless steel |
| إنهاء السطح | Acid-pickled natural silver matt finish; optional external satin finish |
| نوع المشترك | Push-fit stainless socket with EPDM, NBR or FKM elastomer seal |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
304 or 316L gradeEPDM, NBR or FKM sealsStraight tubes and swept bendsBranches, reducers and cleanout fittings
Planning a Stainless Steel Drain Piping specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
