Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Acessórios de instalação de sala limpa
Silicone Gasket
A translucent silicone compression gasket for cleanroom frames and equipment interfaces that require flexible sealing through temperature cycling.
- Wide Temperature Flexibility
- Translucent Clean Appearance
- Low-Force Compression
- Custom Vulcanized Loops
Introdução do produto
The silicone gasket is extruded as a translucent hollow or multi-lip profile and joined into a continuous frame-sized loop when required. Silicone rubber remains flexible across a broader temperature range than many general-purpose elastomers and is available in formulations suited to repeated washdown or heated equipment interfaces. Its pale translucent appearance also makes surface contamination and discoloration easier to notice during routine inspection.
Características-chave
Silicone retains flexibility during low- and elevated-temperature cycles common around process equipment.
Translucent material provides a clean visual finish and supports straightforward surface inspection.
Vulcanized corners and custom molded joins create continuous rectangular or shaped sealing loops.
Preocupações do produto do cliente
Temperature cycling and frequent inspection demand a gasket that stays compliant while presenting a clean, easily examined surface.
Ordinary rubber hardens or loses recovery near heated equipment.A suitable silicone compound maintains elastic compression over a wider service-temperature range.
An opaque dark gasket can hide residue and surface discoloration.Translucent silicone makes visible contamination easier to identify during inspection.
Excessive gasket stiffness overloads lightweight access-panel latches.The hollow profile compresses at controlled force while its ribs maintain contact pressure.
Poorly joined corners separate after repeated opening and washing.Vulcanized or molded corner joints form a continuous loop matched to the frame geometry.
Aplicações típicas
Cleanroom equipment access coversHeated pass-through door framesProcess enclosure panelsInspection-window frame sealsWashdown cabinet doors
Parâmetros técnicos
Typical construction ranges for an extruded translucent silicone compression gasket are listed below.
| Material principal | Translucent silicone rubber in hollow, tubular or multi-lip extruded profile |
|---|---|
| Painel de espessura | 3-18 mm uncompressed gasket profile height |
| Largura efetiva | 6-35 mm sealing contact width |
| Comprimento máximo | Up to 30000 mm continuous extrusion or custom vulcanized loop perimeter |
| Aço enfrentando espessura | 0.50-2.00 mm compatible equipment or frame retaining flange |
| Densidade Core | Approximately 500-850 kg/m³ for cellular silicone or 1100-1250 kg/m³ for compact silicone |
| Condutividade térmica | Approximately 0.10-0.30 W/(m·K), depending on cellular or compact profile |
| Superfície acabado | Smooth translucent milky-white silicone with defined compression ribs |
| Tipo conjunto | Continuous extrusion, bonded splice or vulcanized custom closed loop |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Translucent or pigmented siliconeHollow or cellular profileVulcanized rectangular loopCustom cross-section and hardness
Planning a Silicone Gasket specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
