English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
اكسسوارات تركيب الغرف النظيفة
سيليكون طوقا
A translucent silicone compression gasket for cleanroom frames and equipment interfaces that require flexible sealing through temperature cycling.
- Wide Temperature Flexibility
- Translucent Clean Appearance
- Low-Force Compression
- Custom Vulcanized Loops
مقدمة المنتج
The silicone gasket is extruded as a translucent hollow or multi-lip profile and joined into a continuous frame-sized loop when required. Silicone rubber remains flexible across a broader temperature range than many general-purpose elastomers and is available in formulations suited to repeated washdown or heated equipment interfaces. Its pale translucent appearance also makes surface contamination and discoloration easier to notice during routine inspection.
الخصائص الرئيسية
Silicone retains flexibility during low- and elevated-temperature cycles common around process equipment.
Translucent material provides a clean visual finish and supports straightforward surface inspection.
Vulcanized corners and custom molded joins create continuous rectangular or shaped sealing loops.
مخاوف المنتج للعملاء
Temperature cycling and frequent inspection demand a gasket that stays compliant while presenting a clean, easily examined surface.
Ordinary rubber hardens or loses recovery near heated equipment.A suitable silicone compound maintains elastic compression over a wider service-temperature range.
An opaque dark gasket can hide residue and surface discoloration.Translucent silicone makes visible contamination easier to identify during inspection.
Excessive gasket stiffness overloads lightweight access-panel latches.The hollow profile compresses at controlled force while its ribs maintain contact pressure.
Poorly joined corners separate after repeated opening and washing.Vulcanized or molded corner joints form a continuous loop matched to the frame geometry.
تطبيقات نموذجية
Cleanroom equipment access coversHeated pass-through door framesProcess enclosure panelsInspection-window frame sealsWashdown cabinet doors
المعلمات الفنية
Typical construction ranges for an extruded translucent silicone compression gasket are listed below.
| المواد الأساسية | Translucent silicone rubber in hollow, tubular or multi-lip extruded profile |
|---|---|
| سمك اللوحة | 3-18 mm uncompressed gasket profile height |
| العرض الفعال | 6-35 mm sealing contact width |
| الحد الأقصى الطول | Up to 30000 mm continuous extrusion or custom vulcanized loop perimeter |
| الصلب يواجه سمك | 0.50-2.00 mm compatible equipment or frame retaining flange |
| الكثافة الأساسية | Approximately 500-850 kg/m³ for cellular silicone or 1100-1250 kg/m³ for compact silicone |
| الموصلية الحرارية | Approximately 0.10-0.30 W/(m·K), depending on cellular or compact profile |
| إنهاء السطح | Smooth translucent milky-white silicone with defined compression ribs |
| نوع المشترك | Continuous extrusion, bonded splice or vulcanized custom closed loop |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Translucent or pigmented siliconeHollow or cellular profileVulcanized rectangular loopCustom cross-section and hardness
Planning a Silicone Gasket specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
