Aksesori Pemasangan Bilik Bersih

Gasket silikon

A translucent silicone compression gasket for cleanroom frames and equipment interfaces that require flexible sealing through temperature cycling.

Wide Temperature Flexibility
Translucent Clean Appearance
Low-Force Compression
Custom Vulcanized Loops

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The silicone gasket is extruded as a translucent hollow or multi-lip profile and joined into a continuous frame-sized loop when required. Silicone rubber remains flexible across a broader temperature range than many general-purpose elastomers and is available in formulations suited to repeated washdown or heated equipment interfaces. Its pale translucent appearance also makes surface contamination and discoloration easier to notice during routine inspection.

Ciri-ciri Utama

A hollow profile develops sealing pressure progressively without demanding excessive closure force.

Silicone retains flexibility during low- and elevated-temperature cycles common around process equipment.

Translucent material provides a clean visual finish and supports straightforward surface inspection.

Vulcanized corners and custom molded joins create continuous rectangular or shaped sealing loops.

Kebimbangan Produk Pelanggan

Temperature cycling and frequent inspection demand a gasket that stays compliant while presenting a clean, easily examined surface.

Ordinary rubber hardens or loses recovery near heated equipment.A suitable silicone compound maintains elastic compression over a wider service-temperature range.

An opaque dark gasket can hide residue and surface discoloration.Translucent silicone makes visible contamination easier to identify during inspection.

Excessive gasket stiffness overloads lightweight access-panel latches.The hollow profile compresses at controlled force while its ribs maintain contact pressure.

Poorly joined corners separate after repeated opening and washing.Vulcanized or molded corner joints form a continuous loop matched to the frame geometry.

Permohonan yang biasa

Cleanroom equipment access coversHeated pass-through door framesProcess enclosure panelsInspection-window frame sealsWashdown cabinet doors

Parameter teknikal

Typical construction ranges for an extruded translucent silicone compression gasket are listed below.

Bahan Teras	Translucent silicone rubber in hollow, tubular or multi-lip extruded profile
Ketebalan Panel	3-18 mm uncompressed gasket profile height
Lebar berkesan	6-35 mm sealing contact width
Panjang maksimum	Up to 30000 mm continuous extrusion or custom vulcanized loop perimeter
Keluli Menghadapi Ketebalan	0.50-2.00 mm compatible equipment or frame retaining flange
Ketumpatan teras	Approximately 500-850 kg/m³ for cellular silicone or 1100-1250 kg/m³ for compact silicone
Kekonduksian Terma	Approximately 0.10-0.30 W/(m·K), depending on cellular or compact profile
Kemasan permukaan	Smooth translucent milky-white silicone with defined compression ribs
Jenis Bersatu	Continuous extrusion, bonded splice or vulcanized custom closed loop
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Translucent or pigmented siliconeHollow or cellular profileVulcanized rectangular loopCustom cross-section and hardness

Planning a Silicone Gasket specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami