클린룸 설치 액세서리

실리콘 가스켓

A translucent silicone compression gasket for cleanroom frames and equipment interfaces that require flexible sealing through temperature cycling.

Wide Temperature Flexibility
Translucent Clean Appearance
Low-Force Compression
Custom Vulcanized Loops

견적 요청 제품 찾아보기

상품 소개

The silicone gasket is extruded as a translucent hollow or multi-lip profile and joined into a continuous frame-sized loop when required. Silicone rubber remains flexible across a broader temperature range than many general-purpose elastomers and is available in formulations suited to repeated washdown or heated equipment interfaces. Its pale translucent appearance also makes surface contamination and discoloration easier to notice during routine inspection.

주요 기능

A hollow profile develops sealing pressure progressively without demanding excessive closure force.

Silicone retains flexibility during low- and elevated-temperature cycles common around process equipment.

Translucent material provides a clean visual finish and supports straightforward surface inspection.

Vulcanized corners and custom molded joins create continuous rectangular or shaped sealing loops.

고객 제품 관심사

Temperature cycling and frequent inspection demand a gasket that stays compliant while presenting a clean, easily examined surface.

Ordinary rubber hardens or loses recovery near heated equipment.A suitable silicone compound maintains elastic compression over a wider service-temperature range.

An opaque dark gasket can hide residue and surface discoloration.Translucent silicone makes visible contamination easier to identify during inspection.

Excessive gasket stiffness overloads lightweight access-panel latches.The hollow profile compresses at controlled force while its ribs maintain contact pressure.

Poorly joined corners separate after repeated opening and washing.Vulcanized or molded corner joints form a continuous loop matched to the frame geometry.

일반적인 응용 프로그램

Cleanroom equipment access coversHeated pass-through door framesProcess enclosure panelsInspection-window frame sealsWashdown cabinet doors

기술 매개변수

Typical construction ranges for an extruded translucent silicone compression gasket are listed below.

핵심 재료	Translucent silicone rubber in hollow, tubular or multi-lip extruded profile
패널 두께	3-18 mm uncompressed gasket profile height
유효 폭	6-35 mm sealing contact width
최대 길이	Up to 30000 mm continuous extrusion or custom vulcanized loop perimeter
강철 면면 두께	0.50-2.00 mm compatible equipment or frame retaining flange
코어 밀도	Approximately 500-850 kg/m³ for cellular silicone or 1100-1250 kg/m³ for compact silicone
열전도도 (Thermal Conductivity)	Approximately 0.10-0.30 W/(m·K), depending on cellular or compact profile
표면 마무리	Smooth translucent milky-white silicone with defined compression ribs
접합 유형	Continuous extrusion, bonded splice or vulcanized custom closed loop
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Translucent or pigmented siliconeHollow or cellular profileVulcanized rectangular loopCustom cross-section and hardness

Planning a Silicone Gasket specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.