クリーンルームの設置付属品

シリコーンガスケット

A translucent silicone compression gasket for cleanroom frames and equipment interfaces that require flexible sealing through temperature cycling.

Wide Temperature Flexibility
Translucent Clean Appearance
Low-Force Compression
Custom Vulcanized Loops

見積もりリクエスト製品案内

商品紹介

The silicone gasket is extruded as a translucent hollow or multi-lip profile and joined into a continuous frame-sized loop when required. Silicone rubber remains flexible across a broader temperature range than many general-purpose elastomers and is available in formulations suited to repeated washdown or heated equipment interfaces. Its pale translucent appearance also makes surface contamination and discoloration easier to notice during routine inspection.

主要な特徴

A hollow profile develops sealing pressure progressively without demanding excessive closure force.

Silicone retains flexibility during low- and elevated-temperature cycles common around process equipment.

Translucent material provides a clean visual finish and supports straightforward surface inspection.

Vulcanized corners and custom molded joins create continuous rectangular or shaped sealing loops.

お客様の製品に関する懸念事項

Temperature cycling and frequent inspection demand a gasket that stays compliant while presenting a clean, easily examined surface.

Ordinary rubber hardens or loses recovery near heated equipment.A suitable silicone compound maintains elastic compression over a wider service-temperature range.

An opaque dark gasket can hide residue and surface discoloration.Translucent silicone makes visible contamination easier to identify during inspection.

Excessive gasket stiffness overloads lightweight access-panel latches.The hollow profile compresses at controlled force while its ribs maintain contact pressure.

Poorly joined corners separate after repeated opening and washing.Vulcanized or molded corner joints form a continuous loop matched to the frame geometry.

典型的な用途

Cleanroom equipment access coversHeated pass-through door framesProcess enclosure panelsInspection-window frame sealsWashdown cabinet doors

技術的なパラメータ

Typical construction ranges for an extruded translucent silicone compression gasket are listed below.

コア材料	Translucent silicone rubber in hollow, tubular or multi-lip extruded profile
パネルの厚さ	3-18 mm uncompressed gasket profile height
有効幅	6-35 mm sealing contact width
最大長さ	Up to 30000 mm continuous extrusion or custom vulcanized loop perimeter
鋼鉄の厚さを直面する	0.50-2.00 mm compatible equipment or frame retaining flange
コア密度	Approximately 500-850 kg/m³ for cellular silicone or 1100-1250 kg/m³ for compact silicone
熱伝導率	Approximately 0.10-0.30 W/(m·K), depending on cellular or compact profile
表面仕上げ	Smooth translucent milky-white silicone with defined compression ribs
ジョイントタイプ	Continuous extrusion, bonded splice or vulcanized custom closed loop
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Translucent or pigmented siliconeHollow or cellular profileVulcanized rectangular loopCustom cross-section and hardness

Planning a Silicone Gasket specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する