Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Accessoires d'installation Cleanroom
Silicone Gasket par
A translucent silicone compression gasket for cleanroom frames and equipment interfaces that require flexible sealing through temperature cycling.
- Wide Temperature Flexibility
- Translucent Clean Appearance
- Low-Force Compression
- Custom Vulcanized Loops
Introduction de produit
The silicone gasket is extruded as a translucent hollow or multi-lip profile and joined into a continuous frame-sized loop when required. Silicone rubber remains flexible across a broader temperature range than many general-purpose elastomers and is available in formulations suited to repeated washdown or heated equipment interfaces. Its pale translucent appearance also makes surface contamination and discoloration easier to notice during routine inspection.
Key Features
Silicone retains flexibility during low- and elevated-temperature cycles common around process equipment.
Translucent material provides a clean visual finish and supports straightforward surface inspection.
Vulcanized corners and custom molded joins create continuous rectangular or shaped sealing loops.
Préoccupations du client produit
Temperature cycling and frequent inspection demand a gasket that stays compliant while presenting a clean, easily examined surface.
Ordinary rubber hardens or loses recovery near heated equipment.A suitable silicone compound maintains elastic compression over a wider service-temperature range.
An opaque dark gasket can hide residue and surface discoloration.Translucent silicone makes visible contamination easier to identify during inspection.
Excessive gasket stiffness overloads lightweight access-panel latches.The hollow profile compresses at controlled force while its ribs maintain contact pressure.
Poorly joined corners separate after repeated opening and washing.Vulcanized or molded corner joints form a continuous loop matched to the frame geometry.
Les applications typiques
Cleanroom equipment access coversHeated pass-through door framesProcess enclosure panelsInspection-window frame sealsWashdown cabinet doors
Paramètres techniques
Typical construction ranges for an extruded translucent silicone compression gasket are listed below.
| Matériaux de base | Translucent silicone rubber in hollow, tubular or multi-lip extruded profile |
|---|---|
| Panneau épaisseur | 3-18 mm uncompressed gasket profile height |
| Largeur effective | 6-35 mm sealing contact width |
| Longueur maximale | Up to 30000 mm continuous extrusion or custom vulcanized loop perimeter |
| Acier face épaisseur | 0.50-2.00 mm compatible equipment or frame retaining flange |
| Densité Core | Approximately 500-850 kg/m³ for cellular silicone or 1100-1250 kg/m³ for compact silicone |
| Conductivité thermique | Approximately 0.10-0.30 W/(m·K), depending on cellular or compact profile |
| surface finie | Smooth translucent milky-white silicone with defined compression ribs |
| Type joint | Continuous extrusion, bonded splice or vulcanized custom closed loop |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Translucent or pigmented siliconeHollow or cellular profileVulcanized rectangular loopCustom cross-section and hardness
Planning a Silicone Gasket specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
