Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Accesorios de instalación de sala limpia
Silicone Gasket
A translucent silicone compression gasket for cleanroom frames and equipment interfaces that require flexible sealing through temperature cycling.
- Wide Temperature Flexibility
- Translucent Clean Appearance
- Low-Force Compression
- Custom Vulcanized Loops
Introducción del producto
The silicone gasket is extruded as a translucent hollow or multi-lip profile and joined into a continuous frame-sized loop when required. Silicone rubber remains flexible across a broader temperature range than many general-purpose elastomers and is available in formulations suited to repeated washdown or heated equipment interfaces. Its pale translucent appearance also makes surface contamination and discoloration easier to notice during routine inspection.
Características clave
Silicone retains flexibility during low- and elevated-temperature cycles common around process equipment.
Translucent material provides a clean visual finish and supports straightforward surface inspection.
Vulcanized corners and custom molded joins create continuous rectangular or shaped sealing loops.
Preocupaciones del producto del cliente
Temperature cycling and frequent inspection demand a gasket that stays compliant while presenting a clean, easily examined surface.
Ordinary rubber hardens or loses recovery near heated equipment.A suitable silicone compound maintains elastic compression over a wider service-temperature range.
An opaque dark gasket can hide residue and surface discoloration.Translucent silicone makes visible contamination easier to identify during inspection.
Excessive gasket stiffness overloads lightweight access-panel latches.The hollow profile compresses at controlled force while its ribs maintain contact pressure.
Poorly joined corners separate after repeated opening and washing.Vulcanized or molded corner joints form a continuous loop matched to the frame geometry.
Aplicaciones típicas
Cleanroom equipment access coversHeated pass-through door framesProcess enclosure panelsInspection-window frame sealsWashdown cabinet doors
Parámetros técnicos
Typical construction ranges for an extruded translucent silicone compression gasket are listed below.
| Materiales Core | Translucent silicone rubber in hollow, tubular or multi-lip extruded profile |
|---|---|
| Panel de espesor | 3-18 mm uncompressed gasket profile height |
| Ancho efectivo | 6-35 mm sealing contact width |
| Longitud máxima | Up to 30000 mm continuous extrusion or custom vulcanized loop perimeter |
| Acero frente a espesor | 0.50-2.00 mm compatible equipment or frame retaining flange |
| Densidad Core | Approximately 500-850 kg/m³ for cellular silicone or 1100-1250 kg/m³ for compact silicone |
| Conductividad térmica | Approximately 0.10-0.30 W/(m·K), depending on cellular or compact profile |
| Superficie acabada | Smooth translucent milky-white silicone with defined compression ribs |
| Tipo conjunto | Continuous extrusion, bonded splice or vulcanized custom closed loop |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Translucent or pigmented siliconeHollow or cellular profileVulcanized rectangular loopCustom cross-section and hardness
Planning a Silicone Gasket specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
