Pale blue hygienic cleanroom vinyl sheet formed into a rounded floor cove

Sistema de piso para sala limpa

Higiene Cleanroom Vinil Sheet Flooring

A low-emission homogeneous vinyl sheet developed for controlled environments where particle release, decontamination and sealed floor-to-wall transitions are primary concerns.

Low-Particle Surface
Heat-Welded Hygienic Seams
Decontamination-Ready Finish
Integral Coved Perimeter

Solicite um orçamento. Browse produtos

Introdução do produto

Hygienic cleanroom vinyl sheet flooring uses a dense, non-directional homogeneous PVC body with a smooth factory treatment designed to release soils without a separate wax layer. Wide rolls are fully adhered, routed and hot welded to create a continuous floor field. At room boundaries the same sheet can be formed over a cove former and terminated at the wall system, removing the sharp internal corner found at a conventional skirting joint. The cleanroom formulation prioritizes low particle emission, low outgassing and resistance to common chemical and vapor-phase decontamination routines.

Características-chave

The compact surface limits open texture where particles and process residue could collect.

Low-emission formulation is suited to controlled environments with strict airborne contamination management.

Hot-welded seams and coved perimeters create accessible transitions for validated cleaning procedures.

The surface is selected for resistance to common disinfectants and hydrogen-peroxide decontamination cycles.

Preocupações do produto do cliente

Cleanroom sheet flooring must control emissions and particles while remaining compatible with intensive disinfection and sealed room detailing.

Embossed or porous flooring retains residues after routine decontamination.A dense, smooth homogeneous surface provides fewer micro-textured retention points.

The floor-to-wall corner is difficult to wipe and inspect.Site-formed coving carries the sheet smoothly up the perimeter before it meets the wall finish.

Sheet seams open after repeated trolley movement and wet cleaning.Correct routing and compatible hot-welding rod fuse adjacent edges into a closed joint.

Vaporized disinfection agents discolor or soften general-purpose vinyl.The cleanroom formulation and seam components are selected for the planned chemical and decontamination cycle.

Aplicações típicas

Pharmaceutical cleanroomsLaboratórios de BiotecnologiaMedical-device assembly roomsSterile compounding support areasControlled research suites

Parâmetros técnicos

Representative dimensions and material data for homogeneous cleanroom vinyl sheet flooring are provided below.

Material principal	Type I homogeneous compact PVC with low-emission plasticizer, mineral filler and color pigments
Painel de espessura	2.0 mm full-thickness homogeneous construction
Largura efetiva	2000 mm standard cleanroom sheet width
Comprimento máximo	Up to 20000 mm standard roll length
Aço enfrentando espessura	0 mm; the cleanroom vinyl sheet has no steel facing
Densidade Core	Approximately 1300–1320 kg/m³ based on common 2.0 mm cleanroom sheet weights
Condutividade térmica	Approximately 0.25 W/(m·K) for the homogeneous vinyl body
Superfície acabado	Smooth non-directional matte finish with factory cross-linked maintenance treatment
Tipo conjunto	Fully adhered and hot-welded sheet seams with site-formed coved wall transitions
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Cleanroom neutral and wayfinding colorsMatching hot-welding rodCove former, cap strip and wall transition profilesConductive or standard adhesive system to suit room requirements

Planning a Hygienic Cleanroom Vinyl Sheet Flooring specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe