Pale blue hygienic cleanroom vinyl sheet formed into a rounded floor cove

Temiz Oda zemin sistemleri

Hijyenik Temiz Odası Vinil Çapka Zemin

A low-emission homogeneous vinyl sheet developed for controlled environments where particle release, decontamination and sealed floor-to-wall transitions are primary concerns.

Low-Particle Surface
Heat-Welded Hygienic Seams
Decontamination-Ready Finish
Integral Coved Perimeter

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Hygienic cleanroom vinyl sheet flooring uses a dense, non-directional homogeneous PVC body with a smooth factory treatment designed to release soils without a separate wax layer. Wide rolls are fully adhered, routed and hot welded to create a continuous floor field. At room boundaries the same sheet can be formed over a cove former and terminated at the wall system, removing the sharp internal corner found at a conventional skirting joint. The cleanroom formulation prioritizes low particle emission, low outgassing and resistance to common chemical and vapor-phase decontamination routines.

Ana Özellikler

The compact surface limits open texture where particles and process residue could collect.

Low-emission formulation is suited to controlled environments with strict airborne contamination management.

Hot-welded seams and coved perimeters create accessible transitions for validated cleaning procedures.

The surface is selected for resistance to common disinfectants and hydrogen-peroxide decontamination cycles.

Müşteri Ürün Sorunları

Cleanroom sheet flooring must control emissions and particles while remaining compatible with intensive disinfection and sealed room detailing.

Embossed or porous flooring retains residues after routine decontamination.A dense, smooth homogeneous surface provides fewer micro-textured retention points.

The floor-to-wall corner is difficult to wipe and inspect.Site-formed coving carries the sheet smoothly up the perimeter before it meets the wall finish.

Sheet seams open after repeated trolley movement and wet cleaning.Correct routing and compatible hot-welding rod fuse adjacent edges into a closed joint.

Vaporized disinfection agents discolor or soften general-purpose vinyl.The cleanroom formulation and seam components are selected for the planned chemical and decontamination cycle.

Tipik uygulamalar

Pharmaceutical cleanroomsBiyoteknoloji LaboratuvarlarıMedical-device assembly roomsSterile compounding support areasControlled research suites

Teknik parametreler

Representative dimensions and material data for homogeneous cleanroom vinyl sheet flooring are provided below.

Temel malzemeler	Type I homogeneous compact PVC with low-emission plasticizer, mineral filler and color pigments
Panel kalınlığı	2.0 mm full-thickness homogeneous construction
Effective Width (Etkili Genişlik)	2000 mm standard cleanroom sheet width
Maksimum uzunluk	Up to 20000 mm standard roll length
Çelik yüz yüze kalınlığı	0 mm; the cleanroom vinyl sheet has no steel facing
Core Density (Çekirdek Yoğunluğu)	Approximately 1300–1320 kg/m³ based on common 2.0 mm cleanroom sheet weights
Termal İletkenlik	Approximately 0.25 W/(m·K) for the homogeneous vinyl body
Yüzey bitirme	Smooth non-directional matte finish with factory cross-linked maintenance treatment
Ortak tip	Fully adhered and hot-welded sheet seams with site-formed coved wall transitions
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Cleanroom neutral and wayfinding colorsMatching hot-welding rodCove former, cap strip and wall transition profilesConductive or standard adhesive system to suit room requirements

Planning a Hygienic Cleanroom Vinyl Sheet Flooring specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun