Pale blue hygienic cleanroom vinyl sheet formed into a rounded floor cove

클린룸 바닥 시스템

위생 클린룸 비닐 시트 바닥

A low-emission homogeneous vinyl sheet developed for controlled environments where particle release, decontamination and sealed floor-to-wall transitions are primary concerns.

Low-Particle Surface
Heat-Welded Hygienic Seams
Decontamination-Ready Finish
Integral Coved Perimeter

견적 요청 제품 찾아보기

상품 소개

Hygienic cleanroom vinyl sheet flooring uses a dense, non-directional homogeneous PVC body with a smooth factory treatment designed to release soils without a separate wax layer. Wide rolls are fully adhered, routed and hot welded to create a continuous floor field. At room boundaries the same sheet can be formed over a cove former and terminated at the wall system, removing the sharp internal corner found at a conventional skirting joint. The cleanroom formulation prioritizes low particle emission, low outgassing and resistance to common chemical and vapor-phase decontamination routines.

주요 기능

The compact surface limits open texture where particles and process residue could collect.

Low-emission formulation is suited to controlled environments with strict airborne contamination management.

Hot-welded seams and coved perimeters create accessible transitions for validated cleaning procedures.

The surface is selected for resistance to common disinfectants and hydrogen-peroxide decontamination cycles.

고객 제품 관심사

Cleanroom sheet flooring must control emissions and particles while remaining compatible with intensive disinfection and sealed room detailing.

Embossed or porous flooring retains residues after routine decontamination.A dense, smooth homogeneous surface provides fewer micro-textured retention points.

The floor-to-wall corner is difficult to wipe and inspect.Site-formed coving carries the sheet smoothly up the perimeter before it meets the wall finish.

Sheet seams open after repeated trolley movement and wet cleaning.Correct routing and compatible hot-welding rod fuse adjacent edges into a closed joint.

Vaporized disinfection agents discolor or soften general-purpose vinyl.The cleanroom formulation and seam components are selected for the planned chemical and decontamination cycle.

일반적인 응용 프로그램

Pharmaceutical cleanrooms생명공학 연구소 (Biotechnology Laboratories)Medical-device assembly roomsSterile compounding support areasControlled research suites

기술 매개변수

Representative dimensions and material data for homogeneous cleanroom vinyl sheet flooring are provided below.

핵심 재료	Type I homogeneous compact PVC with low-emission plasticizer, mineral filler and color pigments
패널 두께	2.0 mm full-thickness homogeneous construction
유효 폭	2000 mm standard cleanroom sheet width
최대 길이	Up to 20000 mm standard roll length
강철 면면 두께	0 mm; the cleanroom vinyl sheet has no steel facing
코어 밀도	Approximately 1300–1320 kg/m³ based on common 2.0 mm cleanroom sheet weights
열전도도 (Thermal Conductivity)	Approximately 0.25 W/(m·K) for the homogeneous vinyl body
표면 마무리	Smooth non-directional matte finish with factory cross-linked maintenance treatment
접합 유형	Fully adhered and hot-welded sheet seams with site-formed coved wall transitions
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Cleanroom neutral and wayfinding colorsMatching hot-welding rodCove former, cap strip and wall transition profilesConductive or standard adhesive system to suit room requirements

Planning a Hygienic Cleanroom Vinyl Sheet Flooring specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.