English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الأرضيات الغرف النظيفة
غرف نظيفة الفينيل ورقة الأرضيات
A low-emission homogeneous vinyl sheet developed for controlled environments where particle release, decontamination and sealed floor-to-wall transitions are primary concerns.
- Low-Particle Surface
- Heat-Welded Hygienic Seams
- Decontamination-Ready Finish
- Integral Coved Perimeter
مقدمة المنتج
Hygienic cleanroom vinyl sheet flooring uses a dense, non-directional homogeneous PVC body with a smooth factory treatment designed to release soils without a separate wax layer. Wide rolls are fully adhered, routed and hot welded to create a continuous floor field. At room boundaries the same sheet can be formed over a cove former and terminated at the wall system, removing the sharp internal corner found at a conventional skirting joint. The cleanroom formulation prioritizes low particle emission, low outgassing and resistance to common chemical and vapor-phase decontamination routines.
الخصائص الرئيسية
Low-emission formulation is suited to controlled environments with strict airborne contamination management.
Hot-welded seams and coved perimeters create accessible transitions for validated cleaning procedures.
The surface is selected for resistance to common disinfectants and hydrogen-peroxide decontamination cycles.
مخاوف المنتج للعملاء
Cleanroom sheet flooring must control emissions and particles while remaining compatible with intensive disinfection and sealed room detailing.
Embossed or porous flooring retains residues after routine decontamination.A dense, smooth homogeneous surface provides fewer micro-textured retention points.
The floor-to-wall corner is difficult to wipe and inspect.Site-formed coving carries the sheet smoothly up the perimeter before it meets the wall finish.
Sheet seams open after repeated trolley movement and wet cleaning.Correct routing and compatible hot-welding rod fuse adjacent edges into a closed joint.
Vaporized disinfection agents discolor or soften general-purpose vinyl.The cleanroom formulation and seam components are selected for the planned chemical and decontamination cycle.
تطبيقات نموذجية
Pharmaceutical cleanroomsمختبرات التكنولوجيا الحيويةMedical-device assembly roomsSterile compounding support areasControlled research suites
المعلمات الفنية
Representative dimensions and material data for homogeneous cleanroom vinyl sheet flooring are provided below.
| المواد الأساسية | Type I homogeneous compact PVC with low-emission plasticizer, mineral filler and color pigments |
|---|---|
| سمك اللوحة | 2.0 mm full-thickness homogeneous construction |
| العرض الفعال | 2000 mm standard cleanroom sheet width |
| الحد الأقصى الطول | Up to 20000 mm standard roll length |
| الصلب يواجه سمك | 0 mm; the cleanroom vinyl sheet has no steel facing |
| الكثافة الأساسية | Approximately 1300–1320 kg/m³ based on common 2.0 mm cleanroom sheet weights |
| الموصلية الحرارية | Approximately 0.25 W/(m·K) for the homogeneous vinyl body |
| إنهاء السطح | Smooth non-directional matte finish with factory cross-linked maintenance treatment |
| نوع المشترك | Fully adhered and hot-welded sheet seams with site-formed coved wall transitions |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Cleanroom neutral and wayfinding colorsMatching hot-welding rodCove former, cap strip and wall transition profilesConductive or standard adhesive system to suit room requirements
Planning a Hygienic Cleanroom Vinyl Sheet Flooring specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
