Pale blue hygienic cleanroom vinyl sheet formed into a rounded floor cove

クリーンルームフロアシステム

衛生的なクリーンルームのビニールシートの床

A low-emission homogeneous vinyl sheet developed for controlled environments where particle release, decontamination and sealed floor-to-wall transitions are primary concerns.

Low-Particle Surface
Heat-Welded Hygienic Seams
Decontamination-Ready Finish
Integral Coved Perimeter

見積もりリクエスト製品案内

商品紹介

Hygienic cleanroom vinyl sheet flooring uses a dense, non-directional homogeneous PVC body with a smooth factory treatment designed to release soils without a separate wax layer. Wide rolls are fully adhered, routed and hot welded to create a continuous floor field. At room boundaries the same sheet can be formed over a cove former and terminated at the wall system, removing the sharp internal corner found at a conventional skirting joint. The cleanroom formulation prioritizes low particle emission, low outgassing and resistance to common chemical and vapor-phase decontamination routines.

主要な特徴

The compact surface limits open texture where particles and process residue could collect.

Low-emission formulation is suited to controlled environments with strict airborne contamination management.

Hot-welded seams and coved perimeters create accessible transitions for validated cleaning procedures.

The surface is selected for resistance to common disinfectants and hydrogen-peroxide decontamination cycles.

お客様の製品に関する懸念事項

Cleanroom sheet flooring must control emissions and particles while remaining compatible with intensive disinfection and sealed room detailing.

Embossed or porous flooring retains residues after routine decontamination.A dense, smooth homogeneous surface provides fewer micro-textured retention points.

The floor-to-wall corner is difficult to wipe and inspect.Site-formed coving carries the sheet smoothly up the perimeter before it meets the wall finish.

Sheet seams open after repeated trolley movement and wet cleaning.Correct routing and compatible hot-welding rod fuse adjacent edges into a closed joint.

Vaporized disinfection agents discolor or soften general-purpose vinyl.The cleanroom formulation and seam components are selected for the planned chemical and decontamination cycle.

典型的な用途

Pharmaceutical cleanroomsBiotechnology laboratoriesMedical-device assembly roomsSterile compounding support areasControlled research suites

技術的なパラメータ

Representative dimensions and material data for homogeneous cleanroom vinyl sheet flooring are provided below.

コア材料	Type I homogeneous compact PVC with low-emission plasticizer, mineral filler and color pigments
パネルの厚さ	2.0 mm full-thickness homogeneous construction
有効幅	2000 mm standard cleanroom sheet width
最大長さ	Up to 20000 mm standard roll length
鋼鉄の厚さを直面する	0 mm; the cleanroom vinyl sheet has no steel facing
コア密度	Approximately 1300–1320 kg/m³ based on common 2.0 mm cleanroom sheet weights
熱伝導率	Approximately 0.25 W/(m·K) for the homogeneous vinyl body
表面仕上げ	Smooth non-directional matte finish with factory cross-linked maintenance treatment
ジョイントタイプ	Fully adhered and hot-welded sheet seams with site-formed coved wall transitions
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Cleanroom neutral and wayfinding colorsMatching hot-welding rodCove former, cap strip and wall transition profilesConductive or standard adhesive system to suit room requirements

Planning a Hygienic Cleanroom Vinyl Sheet Flooring specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する