Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pisos de sala limpia
Sala limpia higiénica piso de vinilo
A low-emission homogeneous vinyl sheet developed for controlled environments where particle release, decontamination and sealed floor-to-wall transitions are primary concerns.
- Low-Particle Surface
- Heat-Welded Hygienic Seams
- Decontamination-Ready Finish
- Integral Coved Perimeter
Introducción del producto
Hygienic cleanroom vinyl sheet flooring uses a dense, non-directional homogeneous PVC body with a smooth factory treatment designed to release soils without a separate wax layer. Wide rolls are fully adhered, routed and hot welded to create a continuous floor field. At room boundaries the same sheet can be formed over a cove former and terminated at the wall system, removing the sharp internal corner found at a conventional skirting joint. The cleanroom formulation prioritizes low particle emission, low outgassing and resistance to common chemical and vapor-phase decontamination routines.
Características clave
Low-emission formulation is suited to controlled environments with strict airborne contamination management.
Hot-welded seams and coved perimeters create accessible transitions for validated cleaning procedures.
The surface is selected for resistance to common disinfectants and hydrogen-peroxide decontamination cycles.
Preocupaciones del producto del cliente
Cleanroom sheet flooring must control emissions and particles while remaining compatible with intensive disinfection and sealed room detailing.
Embossed or porous flooring retains residues after routine decontamination.A dense, smooth homogeneous surface provides fewer micro-textured retention points.
The floor-to-wall corner is difficult to wipe and inspect.Site-formed coving carries the sheet smoothly up the perimeter before it meets the wall finish.
Sheet seams open after repeated trolley movement and wet cleaning.Correct routing and compatible hot-welding rod fuse adjacent edges into a closed joint.
Vaporized disinfection agents discolor or soften general-purpose vinyl.The cleanroom formulation and seam components are selected for the planned chemical and decontamination cycle.
Aplicaciones típicas
Pharmaceutical cleanroomsBiotechnology laboratoriesMedical-device assembly roomsSterile compounding support areasControlled research suites
Parámetros técnicos
Representative dimensions and material data for homogeneous cleanroom vinyl sheet flooring are provided below.
| Materiales Core | Type I homogeneous compact PVC with low-emission plasticizer, mineral filler and color pigments |
|---|---|
| Panel de espesor | 2.0 mm full-thickness homogeneous construction |
| Ancho efectivo | 2000 mm standard cleanroom sheet width |
| Longitud máxima | Up to 20000 mm standard roll length |
| Acero frente a espesor | 0 mm; the cleanroom vinyl sheet has no steel facing |
| Densidad Core | Approximately 1300–1320 kg/m³ based on common 2.0 mm cleanroom sheet weights |
| Conductividad térmica | Approximately 0.25 W/(m·K) for the homogeneous vinyl body |
| Superficie acabada | Smooth non-directional matte finish with factory cross-linked maintenance treatment |
| Tipo conjunto | Fully adhered and hot-welded sheet seams with site-formed coved wall transitions |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Cleanroom neutral and wayfinding colorsMatching hot-welding rodCove former, cap strip and wall transition profilesConductive or standard adhesive system to suit room requirements
Planning a Hygienic Cleanroom Vinyl Sheet Flooring specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
