Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamentos de drenagem, higiene e segurança da sala limpa
Z Explosão Vent
A rupture-membrane vent that opens rapidly to relieve explosion pressure from process vessels and dust collectors.
- Fast Rupture-Membrane Opening
- Hygienic Stainless Frame
- Low-Leakage Perimeter Seal
- Optional Burst Detection
Introdução do produto
The explosion vent mounts over a calculated relief opening on a vessel, collector or duct. A scored or domed membrane remains sealed under normal pressure and ruptures at its specified burst condition, providing a large low-inertia discharge area. The clamping frame, gasket and support arrangement are selected for pressure cycling, temperature and cleaning conditions.
Características-chave
A perimeter gasket maintains normal process containment.
Stainless construction supports hygienic and corrosion-sensitive service.
A burst sensor can initiate shutdown and alarm sequences.
Preocupações do produto do cliente
Combustible dust equipment needs rapid pressure relief without allowing normal product leakage or contamination around the opening.
A heavy door responds too slowly to a fast pressure rise.A low-inertia rupture membrane opens across its designed relief area.
Pressure cycling fatigues an unsuitable vent element.Membrane profile and support are selected for the normal vacuum and pressure cycle.
Product and wash liquid can collect at rough frame joints.A stainless hygienic frame and continuous compatible gasket reduce crevices.
A burst event must stop connected equipment.An optional rupture indicator sends an immediate interlock signal.
Aplicações típicas
Dust collectorsPowder process vesselsHygienic conveying systemsFilter and dryer equipment
Parâmetros técnicos
Typical physical construction is listed below; vent area, burst pressure and discharge routing require process-specific explosion-protection engineering.
| Material principal | AISI 304 or 316L stainless rupture membrane and clamping frame |
|---|---|
| Painel de espessura | 0.2-1.0 mm engineered rupture membrane |
| Largura efetiva | 150-1000 mm nominal opening width |
| Comprimento máximo | Up to 1500 mm vent dimension |
| Aço enfrentando espessura | 0.2-1.0 mm rupture membrane surface |
| Densidade Core | 7900-8000 kg/m³ for stainless components |
| Condutividade térmica | 14 - 16 W / (m · K) para componentes inoxidáveis |
| Superfície acabado | Satin, pickled or electropolished stainless |
| Tipo conjunto | Gasketed bolted clamping frame with replaceable rupture element |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Flat or domed membrane316L hygienic frameBurst indicatorCircular or rectangular opening
Planning a Explosion Vent specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
