Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Drenaje de sala limpia, equipos de higiene y seguridad
Explosión Vent
A rupture-membrane vent that opens rapidly to relieve explosion pressure from process vessels and dust collectors.
- Fast Rupture-Membrane Opening
- Hygienic Stainless Frame
- Low-Leakage Perimeter Seal
- Optional Burst Detection
Introducción del producto
The explosion vent mounts over a calculated relief opening on a vessel, collector or duct. A scored or domed membrane remains sealed under normal pressure and ruptures at its specified burst condition, providing a large low-inertia discharge area. The clamping frame, gasket and support arrangement are selected for pressure cycling, temperature and cleaning conditions.
Características clave
A perimeter gasket maintains normal process containment.
Stainless construction supports hygienic and corrosion-sensitive service.
A burst sensor can initiate shutdown and alarm sequences.
Preocupaciones del producto del cliente
Combustible dust equipment needs rapid pressure relief without allowing normal product leakage or contamination around the opening.
A heavy door responds too slowly to a fast pressure rise.A low-inertia rupture membrane opens across its designed relief area.
Pressure cycling fatigues an unsuitable vent element.Membrane profile and support are selected for the normal vacuum and pressure cycle.
Product and wash liquid can collect at rough frame joints.A stainless hygienic frame and continuous compatible gasket reduce crevices.
A burst event must stop connected equipment.An optional rupture indicator sends an immediate interlock signal.
Aplicaciones típicas
Dust collectorsPowder process vesselsHygienic conveying systemsFilter and dryer equipment
Parámetros técnicos
Typical physical construction is listed below; vent area, burst pressure and discharge routing require process-specific explosion-protection engineering.
| Materiales Core | AISI 304 or 316L stainless rupture membrane and clamping frame |
|---|---|
| Panel de espesor | 0.2-1.0 mm engineered rupture membrane |
| Ancho efectivo | 150-1000 mm nominal opening width |
| Longitud máxima | Up to 1500 mm vent dimension |
| Acero frente a espesor | 0.2-1.0 mm rupture membrane surface |
| Densidad Core | 7900-8000 kg/m³ for stainless components |
| Conductividad térmica | 14 - 16 W / (m · K) para componentes inoxidables por |
| Superficie acabada | Satin, pickled or electropolished stainless |
| Tipo conjunto | Gasketed bolted clamping frame with replaceable rupture element |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Flat or domed membrane316L hygienic frameBurst indicatorCircular or rectangular opening
Planning a Explosion Vent specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
