İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Drenajı, Hijyen ve Güvenlik Ekipmanları
Patlama Vent
A rupture-membrane vent that opens rapidly to relieve explosion pressure from process vessels and dust collectors.
- Fast Rupture-Membrane Opening
- Hygienic Stainless Frame
- Low-Leakage Perimeter Seal
- Optional Burst Detection
Ürün tanıtımı
The explosion vent mounts over a calculated relief opening on a vessel, collector or duct. A scored or domed membrane remains sealed under normal pressure and ruptures at its specified burst condition, providing a large low-inertia discharge area. The clamping frame, gasket and support arrangement are selected for pressure cycling, temperature and cleaning conditions.
Ana Özellikler
A perimeter gasket maintains normal process containment.
Stainless construction supports hygienic and corrosion-sensitive service.
A burst sensor can initiate shutdown and alarm sequences.
Müşteri Ürün Sorunları
Combustible dust equipment needs rapid pressure relief without allowing normal product leakage or contamination around the opening.
A heavy door responds too slowly to a fast pressure rise.A low-inertia rupture membrane opens across its designed relief area.
Pressure cycling fatigues an unsuitable vent element.Membrane profile and support are selected for the normal vacuum and pressure cycle.
Product and wash liquid can collect at rough frame joints.A stainless hygienic frame and continuous compatible gasket reduce crevices.
A burst event must stop connected equipment.An optional rupture indicator sends an immediate interlock signal.
Tipik uygulamalar
Dust collectorsPowder process vesselsHygienic conveying systemsFilter and dryer equipment
Teknik parametreler
Typical physical construction is listed below; vent area, burst pressure and discharge routing require process-specific explosion-protection engineering.
| Temel malzemeler | AISI 304 or 316L stainless rupture membrane and clamping frame |
|---|---|
| Panel kalınlığı | 0.2-1.0 mm engineered rupture membrane |
| Effective Width (Etkili Genişlik) | 150-1000 mm nominal opening width |
| Maksimum uzunluk | Up to 1500 mm vent dimension |
| Çelik yüz yüze kalınlığı | 0.2-1.0 mm rupture membrane surface |
| Core Density (Çekirdek Yoğunluğu) | 7900-8000 kg/m³ for stainless components |
| Termal İletkenlik | Paslanmaz bileşenler için 14-16 W / (m · K) |
| Yüzey bitirme | Satin, pickled or electropolished stainless |
| Ortak tip | Gasketed bolted clamping frame with replaceable rupture element |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Flat or domed membrane316L hygienic frameBurst indicatorCircular or rectangular opening
Planning a Explosion Vent specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
