Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Cleanroom Drainage, Peralatan Kebersihan dan Keselamatan
Ledakan Vent
A rupture-membrane vent that opens rapidly to relieve explosion pressure from process vessels and dust collectors.
- Fast Rupture-Membrane Opening
- Hygienic Stainless Frame
- Low-Leakage Perimeter Seal
- Optional Burst Detection
Perkenalan produk
The explosion vent mounts over a calculated relief opening on a vessel, collector or duct. A scored or domed membrane remains sealed under normal pressure and ruptures at its specified burst condition, providing a large low-inertia discharge area. The clamping frame, gasket and support arrangement are selected for pressure cycling, temperature and cleaning conditions.
Fitur utama:
A perimeter gasket maintains normal process containment.
Stainless construction supports hygienic and corrosion-sensitive service.
A burst sensor can initiate shutdown and alarm sequences.
Kekhawatiran produk pelanggan
Combustible dust equipment needs rapid pressure relief without allowing normal product leakage or contamination around the opening.
A heavy door responds too slowly to a fast pressure rise.A low-inertia rupture membrane opens across its designed relief area.
Pressure cycling fatigues an unsuitable vent element.Membrane profile and support are selected for the normal vacuum and pressure cycle.
Product and wash liquid can collect at rough frame joints.A stainless hygienic frame and continuous compatible gasket reduce crevices.
A burst event must stop connected equipment.An optional rupture indicator sends an immediate interlock signal.
Aplikasi yang Tipis
Dust collectorsPowder process vesselsHygienic conveying systemsFilter and dryer equipment
Parameter teknis
Typical physical construction is listed below; vent area, burst pressure and discharge routing require process-specific explosion-protection engineering.
| Bahan inti | AISI 304 or 316L stainless rupture membrane and clamping frame |
|---|---|
| Ketebalan Panel (Panel Thickness) | 0.2-1.0 mm engineered rupture membrane |
| Efektif lebar | 150-1000 mm nominal opening width |
| Panjang maksimum | Up to 1500 mm vent dimension |
| Baja menghadap ketebalan | 0.2-1.0 mm rupture membrane surface |
| Kepadatan inti (core density) | 7900 - 8000 kg / m3 untuk komponen tahan karat |
| Konduktivitas Termal (Thermal Conductivity) | 14 - 16 W / (m · K) untuk komponen stainless |
| Permukaan selesai | Satin, pickled or electropolished stainless |
| Jenis Bersama | Gasketed bolted clamping frame with replaceable rupture element |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Flat or domed membrane316L hygienic frameBurst indicatorCircular or rectangular opening
Planning a Explosion Vent specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
