Complete hygienic explosion vent and stainless clamping frame in three-quarter view

Peralatan Saliran Bilik Bersih, Kebersihan dan Keselamatan

Vent letupan

A rupture-membrane vent that opens rapidly to relieve explosion pressure from process vessels and dust collectors.

Fast Rupture-Membrane Opening
Hygienic Stainless Frame
Low-Leakage Perimeter Seal
Optional Burst Detection

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The explosion vent mounts over a calculated relief opening on a vessel, collector or duct. A scored or domed membrane remains sealed under normal pressure and ruptures at its specified burst condition, providing a large low-inertia discharge area. The clamping frame, gasket and support arrangement are selected for pressure cycling, temperature and cleaning conditions.

Ciri-ciri Utama

Low-mass rupture membrane provides rapid full-area opening.

A perimeter gasket maintains normal process containment.

Stainless construction supports hygienic and corrosion-sensitive service.

A burst sensor can initiate shutdown and alarm sequences.

Kebimbangan Produk Pelanggan

Combustible dust equipment needs rapid pressure relief without allowing normal product leakage or contamination around the opening.

A heavy door responds too slowly to a fast pressure rise.A low-inertia rupture membrane opens across its designed relief area.

Pressure cycling fatigues an unsuitable vent element.Membrane profile and support are selected for the normal vacuum and pressure cycle.

Product and wash liquid can collect at rough frame joints.A stainless hygienic frame and continuous compatible gasket reduce crevices.

A burst event must stop connected equipment.An optional rupture indicator sends an immediate interlock signal.

Permohonan yang biasa

Dust collectorsPowder process vesselsHygienic conveying systemsFilter and dryer equipment

Parameter teknikal

Typical physical construction is listed below; vent area, burst pressure and discharge routing require process-specific explosion-protection engineering.

Bahan Teras	AISI 304 or 316L stainless rupture membrane and clamping frame
Ketebalan Panel	0.2-1.0 mm engineered rupture membrane
Lebar berkesan	150-1000 mm nominal opening width
Panjang maksimum	Up to 1500 mm vent dimension
Keluli Menghadapi Ketebalan	0.2-1.0 mm rupture membrane surface
Ketumpatan teras	7900-8000 kg/m³ for stainless components
Kekonduksian Terma	14-16 W / (m · K) untuk komponen tahan karat
Kemasan permukaan	Satin, pickled or electropolished stainless
Jenis Bersatu	Gasketed bolted clamping frame with replaceable rupture element
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Flat or domed membrane316L hygienic frameBurst indicatorCircular or rectangular opening

Planning a Explosion Vent specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami