English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الصرف الصحي والنظافة والسلامة في الغرف النظيفة
الانفجار تنفيس
A rupture-membrane vent that opens rapidly to relieve explosion pressure from process vessels and dust collectors.
- Fast Rupture-Membrane Opening
- Hygienic Stainless Frame
- Low-Leakage Perimeter Seal
- Optional Burst Detection
مقدمة المنتج
The explosion vent mounts over a calculated relief opening on a vessel, collector or duct. A scored or domed membrane remains sealed under normal pressure and ruptures at its specified burst condition, providing a large low-inertia discharge area. The clamping frame, gasket and support arrangement are selected for pressure cycling, temperature and cleaning conditions.
الخصائص الرئيسية
A perimeter gasket maintains normal process containment.
Stainless construction supports hygienic and corrosion-sensitive service.
A burst sensor can initiate shutdown and alarm sequences.
مخاوف المنتج للعملاء
Combustible dust equipment needs rapid pressure relief without allowing normal product leakage or contamination around the opening.
A heavy door responds too slowly to a fast pressure rise.A low-inertia rupture membrane opens across its designed relief area.
Pressure cycling fatigues an unsuitable vent element.Membrane profile and support are selected for the normal vacuum and pressure cycle.
Product and wash liquid can collect at rough frame joints.A stainless hygienic frame and continuous compatible gasket reduce crevices.
A burst event must stop connected equipment.An optional rupture indicator sends an immediate interlock signal.
تطبيقات نموذجية
Dust collectorsPowder process vesselsHygienic conveying systemsFilter and dryer equipment
المعلمات الفنية
Typical physical construction is listed below; vent area, burst pressure and discharge routing require process-specific explosion-protection engineering.
| المواد الأساسية | AISI 304 or 316L stainless rupture membrane and clamping frame |
|---|---|
| سمك اللوحة | 0.2-1.0 mm engineered rupture membrane |
| العرض الفعال | 150-1000 mm nominal opening width |
| الحد الأقصى الطول | Up to 1500 mm vent dimension |
| الصلب يواجه سمك | 0.2-1.0 mm rupture membrane surface |
| الكثافة الأساسية | 7900-8000 kg/m³ for stainless components |
| الموصلية الحرارية | 14-16 W/(m·K) for stainless components |
| إنهاء السطح | Satin, pickled or electropolished stainless |
| نوع المشترك | Gasketed bolted clamping frame with replaceable rupture element |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Flat or domed membrane316L hygienic frameBurst indicatorCircular or rectangular opening
Planning a Explosion Vent specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
