Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistema de piso para sala limpa
Epoxy Self-Leveling Flooring (em inglês)
A flow-applied epoxy topping that levels minor substrate variation and cures into a dense, seamless surface for controlled interior spaces.
- Smooth Self-Leveling Finish
- Seamless Cleanable Surface
- Dense 100% Solids Layer
- Custom Color Selection
Introdução do produto
Epoxy self-leveling flooring combines a pigmented epoxy binder with fine graded mineral filler to create a fluid wearing layer over properly prepared and primed concrete. A notched rake establishes the designed thickness, while spike rolling releases entrapped air before cure. The resulting continuous surface has no tile joints to collect residue and provides a stable base for routine cleaning, wheeled traffic and clearly marked production zones. Integral coving can continue the finish from floor to wall.
Características-chave
A dense, non-porous wearing layer limits dusting from the underlying concrete and simplifies wipe-down cleaning.
Fine mineral filler improves dimensional stability, abrasion resistance and resistance to routine trolley traffic.
Pigmented resin can be coordinated with coves, aisle markings and contrasting safety zones without introducing open seams.
Preocupações do produto do cliente
A self-leveling floor must achieve a flat, closed finish without trapping air or allowing weak concrete to print through the resin layer.
Uneven concrete creates low spots where wash water and cleaning solution remain.The flow-applied epoxy layer is raked to a controlled thickness and spike-rolled to form a continuous level surface.
Pinholes in porous concrete become contamination traps in the finished floor.A compatible penetrating primer seals the prepared substrate before the self-leveling body coat is placed.
Tile joints release particles and slow routine sanitation work.The poured system forms a joint-free field and can be turned up as an integral cove at perimeter walls.
A thin decorative paint wears through under carts and repeated foot traffic.A 1.5–4.0 mm filled epoxy topping provides substantially more wearing depth than a thin-film coating.
Aplicações típicas
Pharmaceutical production suitesCleanroom circulation corridorsMedical-device assembly roomsControlled laboratoriesPackaging and inspection areas
Parâmetros técnicos
The following ranges describe a typical filled epoxy self-leveling system for prepared interior concrete.
| Material principal | Pigmented two-part epoxy resin with fine graded quartz or mineral filler |
|---|---|
| Painel de espessura | 1.5–4.0 mm installed system thickness |
| Largura efetiva | Typically 2500–5000 mm placement bay width |
| Comprimento máximo | Typically up to 20000 mm continuous run between planned movement joints |
| Aço enfrentando espessura | 0 mm; the resin flooring system has no steel facing |
| Densidade Core | Approximately 1600–1900 kg/m³ for the mixed filled resin |
| Condutividade térmica | Typically 0.30–0.45 W/(m·K) for the cured filled epoxy layer |
| Superfície acabado | Smooth gloss or satin pigmented finish with optional fine slip texture |
| Tipo conjunto | Primer-bonded seamless topping with structural slab joints carried through and sealed |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
1.5–2.0 mm light-duty or 3.0–4.0 mm higher-build systemGloss or satin protective topcoatIntegral cove base and drain detailingCustom colors and safety-line layouts
Planning a Epoxy Self-Leveling Flooring specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
