Blue epoxy self-leveling flooring sample in a complete three-quarter view

클린룸 바닥 시스템

에폭시 자체 레벨링 바닥

A flow-applied epoxy topping that levels minor substrate variation and cures into a dense, seamless surface for controlled interior spaces.

Smooth Self-Leveling Finish
Seamless Cleanable Surface
Dense 100% Solids Layer
Custom Color Selection

견적 요청 제품 찾아보기

상품 소개

Epoxy self-leveling flooring combines a pigmented epoxy binder with fine graded mineral filler to create a fluid wearing layer over properly prepared and primed concrete. A notched rake establishes the designed thickness, while spike rolling releases entrapped air before cure. The resulting continuous surface has no tile joints to collect residue and provides a stable base for routine cleaning, wheeled traffic and clearly marked production zones. Integral coving can continue the finish from floor to wall.

주요 기능

The flowing resin closes shallow surface irregularities and produces a uniform plane with minimal roller texture.

A dense, non-porous wearing layer limits dusting from the underlying concrete and simplifies wipe-down cleaning.

Fine mineral filler improves dimensional stability, abrasion resistance and resistance to routine trolley traffic.

Pigmented resin can be coordinated with coves, aisle markings and contrasting safety zones without introducing open seams.

고객 제품 관심사

A self-leveling floor must achieve a flat, closed finish without trapping air or allowing weak concrete to print through the resin layer.

Uneven concrete creates low spots where wash water and cleaning solution remain.The flow-applied epoxy layer is raked to a controlled thickness and spike-rolled to form a continuous level surface.

Pinholes in porous concrete become contamination traps in the finished floor.A compatible penetrating primer seals the prepared substrate before the self-leveling body coat is placed.

Tile joints release particles and slow routine sanitation work.The poured system forms a joint-free field and can be turned up as an integral cove at perimeter walls.

A thin decorative paint wears through under carts and repeated foot traffic.A 1.5–4.0 mm filled epoxy topping provides substantially more wearing depth than a thin-film coating.

일반적인 응용 프로그램

제약 생산 제품군Cleanroom circulation corridorsMedical-device assembly rooms통제된 실험실Packaging and inspection areas

기술 매개변수

The following ranges describe a typical filled epoxy self-leveling system for prepared interior concrete.

핵심 재료	Pigmented two-part epoxy resin with fine graded quartz or mineral filler
패널 두께	1.5–4.0 mm installed system thickness
유효 폭	Typically 2500–5000 mm placement bay width
최대 길이	Typically up to 20000 mm continuous run between planned movement joints
강철 면면 두께	0 mm; the resin flooring system has no steel facing
코어 밀도	Approximately 1600–1900 kg/m³ for the mixed filled resin
열전도도 (Thermal Conductivity)	Typically 0.30–0.45 W/(m·K) for the cured filled epoxy layer
표면 마무리	Smooth gloss or satin pigmented finish with optional fine slip texture
접합 유형	Primer-bonded seamless topping with structural slab joints carried through and sealed
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

1.5–2.0 mm light-duty or 3.0–4.0 mm higher-build systemGloss or satin protective topcoatIntegral cove base and drain detailingCustom colors and safety-line layouts

Planning a Epoxy Self-Leveling Flooring specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.