Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom Flooring Systems
Epoxy Plancher auto-nivelant
A flow-applied epoxy topping that levels minor substrate variation and cures into a dense, seamless surface for controlled interior spaces.
- Smooth Self-Leveling Finish
- Seamless Cleanable Surface
- Dense 100% Solids Layer
- Custom Color Selection
Introduction de produit
Epoxy self-leveling flooring combines a pigmented epoxy binder with fine graded mineral filler to create a fluid wearing layer over properly prepared and primed concrete. A notched rake establishes the designed thickness, while spike rolling releases entrapped air before cure. The resulting continuous surface has no tile joints to collect residue and provides a stable base for routine cleaning, wheeled traffic and clearly marked production zones. Integral coving can continue the finish from floor to wall.
Key Features
A dense, non-porous wearing layer limits dusting from the underlying concrete and simplifies wipe-down cleaning.
Fine mineral filler improves dimensional stability, abrasion resistance and resistance to routine trolley traffic.
Pigmented resin can be coordinated with coves, aisle markings and contrasting safety zones without introducing open seams.
Préoccupations du client produit
A self-leveling floor must achieve a flat, closed finish without trapping air or allowing weak concrete to print through the resin layer.
Uneven concrete creates low spots where wash water and cleaning solution remain.The flow-applied epoxy layer is raked to a controlled thickness and spike-rolled to form a continuous level surface.
Pinholes in porous concrete become contamination traps in the finished floor.A compatible penetrating primer seals the prepared substrate before the self-leveling body coat is placed.
Tile joints release particles and slow routine sanitation work.The poured system forms a joint-free field and can be turned up as an integral cove at perimeter walls.
A thin decorative paint wears through under carts and repeated foot traffic.A 1.5–4.0 mm filled epoxy topping provides substantially more wearing depth than a thin-film coating.
Les applications typiques
Pharmaceutical production suitesCleanroom circulation corridorsMedical-device assembly roomsLaboratoires contrôlésPackaging and inspection areas
Paramètres techniques
The following ranges describe a typical filled epoxy self-leveling system for prepared interior concrete.
| Matériaux de base | Pigmented two-part epoxy resin with fine graded quartz or mineral filler |
|---|---|
| Panneau épaisseur | 1.5–4.0 mm installed system thickness |
| Largeur effective | Typically 2500–5000 mm placement bay width |
| Longueur maximale | Typically up to 20000 mm continuous run between planned movement joints |
| Acier face épaisseur | 0 mm; the resin flooring system has no steel facing |
| Densité Core | Approximately 1600–1900 kg/m³ for the mixed filled resin |
| Conductivité thermique | Typically 0.30–0.45 W/(m·K) for the cured filled epoxy layer |
| surface finie | Smooth gloss or satin pigmented finish with optional fine slip texture |
| Type joint | Primer-bonded seamless topping with structural slab joints carried through and sealed |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
1.5–2.0 mm light-duty or 3.0–4.0 mm higher-build systemGloss or satin protective topcoatIntegral cove base and drain detailingCustom colors and safety-line layouts
Planning a Epoxy Self-Leveling Flooring specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
